| Name : ArcWelder
| |
| Version : 1.2.0
| Vendor : obs://build_opensuse_org/home:mrbadguy
|
| Release : 3.35
| Date : 2021-12-05 13:11:24
|
| Group : Hardware/Printing
| Source RPM : ArcWelder-1.2.0-3.35.src.rpm
|
| Size : 0.98 MB
| |
| Packager : (none)
| |
| Summary : Anti Stutter Libraries and Binaries
|
Description :
Converts G0/G1 GCode commands to G2/G3 (arc) commands and back again. This can greatly compress most GCode files and potentially improve quality by preventing planner starvation. It is especially useful when streaming over a serial connection (OctoPrint, Pronterface, Slicer Direct Printing), but has some potential advantages in other cases too depending on your firmware and board.
This software was designed for 3D printers but should also be useful in other cases
|
RPM found in directory: /pbone/ftp5.gwdg.de/pub/opensuse/repositories/home:/mrbadguy:/3dPrinting/openSUSE_Tumbleweed/x86_64 |
