Changelog for systemd-presets-common-SUSE-15-lp150.1.2.noarch.rpm :

* Wed Feb 28 2018 split out common service to be default enabled on all SUSE distributions from the branding. FATE#322139
* Mon Feb 05 2018 Enable backup-rpmdb.timer, backup-sysconfig.timer and check-battery.timer, previously cron.daily jobs.
* Tue Jan 02 2018 Enable new kbdsettings.service (boo#1010880).
* Mon Jan 01 2018 enable pcscd socket activation by default to support smartcards out of the box (boo#1063983)
* Fri Dec 29 2017 Enable lvm2-lvmpolld.socket by default (bsc#1074211)
* Tue Dec 19 2017 Enable lvm2-monitor.service by default (bsc#1072492)
* Tue Dec 12 2017 Don\'t disable services with preset-all in %posttrans, the network is special and would be disabled.
* Mon Dec 11 2017 If we do a fresh installation, call systemctl preset-all in the %posttrans section. Some services need to be installed before systemd or do not strictly require systemd, so systemd would only be installed after them and the systemd units of this package never enabled.
* Mon Dec 11 2017 Enable klog.service and rsyslog.service by default, currently they enable themself always in post install section.
* Wed Dec 06 2017 Enable btrfs-
*.timer by default, switch from cron to systemd.timer- Enable btrfsmaintenance-refresh.service
* Thu Nov 09 2017 Enable ModemManager.service by default (bsc#1038402).
* Fri Nov 03 2017 Move common entries into default-SUSE.preset (bsc#1060676)
* Tue Oct 17 2017 Sort entries with :\'<,\'>!sort -t \' \' -k 2 (bsc#1060676)
* Tue Jun 20 2017 Enable ca-certificates to run on boot and on demand to create database in /var/lib/ca-certificates
* Tue Mar 21 2017 removed duplicated iscsid.socket iscsid.servicce (bsc#1030161)
* Fri Mar 17 2017 Bump version to 12.2 to make version numbers consistent between SLE and Leap (boo#1029775).- Remove superfluous uuidd.service. uuidd.socket is sufficient (bsc#1012850#c8).
* Tue Feb 21 2017 Enable socket/service(s) for lvm2 (bsc#1011053)
* Fri Feb 10 2017 Enable by default uuidd shipped by util-linux (bsc#1012850) util-linux was previously shipping a preset file enabling uuidd by default. This is now done here as other packages are not supposed to ship their own preset rules. Also increase the package version so util-linux can conflict with the previous versions and hence will be updated
* the new version of the presets package is. This is important otherwise if util-linux removed its preset file first, then the presets package would believe a new change in the presets and you enable again uuidd.
* Tue Jan 24 2017 Enable the issue-generator.service by default: /etc/issue is in progress of no longer being a static file, but being generated by a service, which allows for much more flexible content (think ssh key fingerprint or similar).
* Thu Dec 15 2016 Fix pre/post scripts: + On %pre case, when updating from an old version of the package that did not yet contain %{_prefix}/lib/%{generic_name}/branding-preset-states, we can\'t start it. Add a check for execute permission on the script.
* Thu Dec 08 2016 Import preset macros from systemd-rpm-macro and convert them into scripts. Presets are not supposed to be shipped by other packages as the default policy needs to be reviewed by the secteam. Therefore don\'t encourage packagers to do that and make those macros private to this package. Also convert them into real scripts so they\'re much easier to maintain and debug. Also working in %posttrans is unneeded as this package is assumed to be the only one to update the preset.
* Thu Dec 08 2016 There\'s no need to reload the daemon configuration as presets are not part of the dameon config.
* Tue Nov 29 2016 added snapper-cleanup.timer and snapper-timeline.timer (bsc#1011891)
* Tue Jun 14 2016 enable vmblock-fuse service for VMWare by default (bsc#986277)
* Thu Jun 09 2016 don\'t require systemd to avoid dependency loop (boo#983986)
* Tue May 31 2016 added a prereq for coreutils to make sure the macro in %pre works when using touch and mkdir. (bsc#982337)
* Mon May 09 2016 enable mcelog by default instead of using an udev rule on /dev/mcelog (bsc#976781)
* Thu Mar 24 2016 enable, gettyAATT.service. (bsc#972489)
* Wed Dec 16 2015 don\'t enable ModemManager and wpa_supplicant. Both will be started on demand (bnc#717130)
* Wed Dec 16 2015 Add display-manager.service to defaults presets (boo#958880).
* Tue Dec 08 2015 Enable fstrim.timer and disable fstrim.service. TRIM should be performed once a week and not on every boot (FATE#317727).
* Tue Aug 04 2015 Add %systemd_preset_pre and %systemd_preset_posttrans (fixes boo#921075 and all future requests to change service default).
* Wed Jul 15 2015 Enable updatedb timer for mlocate package
* Replaces cron.daily script
* Wed Jul 15 2015 Enable timer for periodic password & group file integrity verification
* Wed Jul 15 2015 Remove xendomains.service from systemd preset file because it conflicts with libvirt-guests.service (bnc#937371) Its up to the admin to run systemctl enable xendomains.service
* Tue Jun 30 2015 If selinux is used, restorecond should be enabled by default. The relevant unit only starts if the system was booted with selinux enabled- Do not start acpid by default, its functionality is provided by logind nowadays.
* Wed Apr 01 2015 Native systemd unit apparmor.service need to be enabled by default.
* Mon Mar 09 2015 enabled smartd by default (bnc#921075)
* Tue Jan 13 2015 enable xencommons and xendomains (bnc#897352)
* Fri Dec 19 2014 enable vmtoolsd service for VMWare by default (bnc#901272)
* Wed Dec 03 2014 remove: enable lvm2-lvmetad.service (bnc#901859)
* Thu Nov 20 2014 enable storage-fixup.service by default due to conversion
* Thu Jun 26 2014 enable wpa_supplicant.service (bnc#860885 comment#20)
* Wed May 28 2014 enable lvm2-lvmetad.socket (bnc#878473) enable lvm2-lvmetad.service
* Fri Apr 11 2014 enable auditd, haveged and irqbalance services by default. bnc#872066
* Wed Apr 02 2014 Enable the logrotate.timer that replaces the cron-based activation by default.
* Fri Mar 07 2014 Enable epmd.socket so that epmd.service can be properly socket-activated instead of forking by beam. The later leads to the issue when epmd is killed at the stop of the specific service and all erlang instances crashes as a consequence. Needed by erlang package. (bnc#869112)
* Thu Feb 13 2014 Enable iscsi daemon socket and iscsi service as installed, so that iscsid.service can be socket-activated. (bnc#853300)
* Sat Feb 01 2014 Revert last change for hyper-v.rpm Both daemons are started on demand via udev rules.
* Wed Dec 18 2013 Enable hv_kvp_daemon and hv_vss_daemon from hyper-v pkg
* Thu Oct 17 2013 Enable iscsid socket and iscsi service by default when installed (bnc#827654).
* Wed Jul 31 2013 Enable ModemManager.service is enabled when installed (it will be dbus-activated by NM).
* Thu Jul 25 2013 Rename main default file to 90-default-openSUSE.preset and move the \"disable everything\" part to a separate file \"99-default-disable.preset\". This allows fine tuning with additional files, if needed (same as Fedora).
* Fri May 03 2013 as we have multiversion kernels enabled by default, we also need to enable purge-kernels by default (bnc#818317).
* Fri Feb 22 2013 Do not unconditionally enable NetworkManager service as this breaks running /etc/init.d/network on update (bnc#803058).
* Wed Oct 17 2012 Change location of presets with latest systemd.
* Tue Sep 11 2012 Add nscd service (bnc#778981).
* Wed Jul 04 2012 Add cups units (service, path and socket) (bnc#769346).
* Mon Dec 12 2011 Add postfix (bnc#727403).
* Wed Oct 26 2011 don\'t enable sysstat by default (bnc#725791)
* Mon Oct 17 2011 Add sysstat.service (bnc#723858).
* Sun Oct 16 2011 buildignore branding for systemd to avoid bootstrap cycle
* Fri Oct 07 2011 Add Yast2 FirstBoot and Second Stage.
* Thu Sep 29 2011 Don\'t enable avahi-dnsconfd.service after all.
* Thu Sep 29 2011 Enable avahi-daemon.service and avahi-dnsconfd.service
* Thu Sep 29 2011 Enable cron.service
* Mon Sep 26 2011 Initial package