Changelog for libxkbcommon0-0.8.3-56.1.x86_64.rpm :
Fri Feb 8 13:00:00 2019 Jan Engelhardt
- Update to new upstream release 0.8.3

* New APIs: XKB_KEY_XF86MonBrightnessCycle,

Tue Aug 7 14:00:00 2018
- Update to new upstream release 0.8.2 (boo#1105832)

* Fix a few NULL-dereferences, out-of-bounds access and undefined
behavior in the XKB text format parser.

* CVEs fixed: CVE-2018-15853, CVE-2018-15854, CVE-2018-15855,
CVE-2018-15856, CVE-2018-15857, CVE-2018-15858, CVE-2018-15859,
CVE-2018-15861, CVE-2018-15862, CVE-2018-15863, CVE-2018-15864
- run make check

Fri Dec 15 13:00:00 2017
- Update to new upstream release 0.8.0

* Added xkb_keysym_to_{upper,lower} to perform case-conversion
directly on keysyms. This is useful in some odd cases, but
working with the Unicode representations should be preferred
when possible.

* Added Unicode conversion rules for the signifblank and
permille keysyms.

* Fixed a bug in the parsing of XKB key type definitions where
the number of levels were determined by the number of level

* names
*. Keymaps which omit level names were hence
miscompiled. This regressed in version 0.4.3. Keymaps from
xkeyboard-config were not affected since they don\'t omit
level names.

Thu Oct 19 14:00:00 2017
- Allow building x11 subpackage on any distribution

Mon Aug 7 14:00:00 2017
- Update to new upstream release 0.7.2

* Added new keysym definitions from xproto.

* New APIs: XKB_KEY_XF86Keyboard, XKB_KEY_XF86WWAN,
XKB_KEY_XF86RFKill, XKB_KEY_XF86AudioPreset.

Wed Jan 18 13:00:00 2017
- Update to new upstream release 0.7.1

* Fixed various reported problems when the current locale is

Fri Nov 11 13:00:00 2016
- Update to new upstream release 0.7.0

* Added support for different \"modes\" of calculating consumed
modifiers. The existing mode, based on the XKB standard, has
proven to be unintuitive in various shortcut implementations.

* A new mode, based on the calculation used by the GTK toolkit,
is added. This mode is less eager to declare a modifier as

Fri Apr 8 14:00:00 2016
- Update to version 0.6.1:

* Add LICENSE to distributed files in tarball releases.

* Minor typo fix in xkb_keymap_get_as_string() documentation.
- Changes from version 0.6.0:

* If the XKB_CONFIG_ROOT environment variable is set, it is used
as the XKB configuration root instead of the path determined at
build time.

* Tests and benchmarks now build correctly on OSX.

* An XKB keymap provides a name for each key it defines.
Traditionally these names are limited to at most 4 characters,
and are thus somewhat obscure, but might still be useful
(xkbcommon lifts the 4 character limit).

* The new functions xkb_keymap_key_get_name() and
xkb_keymap_key_by_name() can be used to get the name of a key
or find a key by name. Note that a key may have aliases.

* Documentation improvements.

* New API:
+ xkb_keymap_key_by_name().
+ xkb_keymap_key_get_name().

Mon Nov 2 13:00:00 2015
- Requires xkeyboard-config, bsc#952403

* libxkbcommon should brings xkeyboard-config together always as
libxkbcommon does not distribute xkb data itself, and especially
requires xkeyboard-config for any rely on libxkbcommon in the
minimal system.

Mon Nov 3 13:00:00 2014
- Update to version 0.5.0:

* Added support for Compose/dead keys in a new module (included in
libxkbcommon). See the documentation or the
xkbcommon/xkbcommon-compose.h header file for more details.

* Improved and reordered some sections of the documentation.

* The doxygen HTML pages were made nicer to read.

* Most tests now run also on non-linux platforms.

* A warning is emitted by default about RMLVO values which are not
used during keymap compilation, which are most often a user
misconfiguration. For example, \"terminate:ctrl_alt_backspace\"
instead of \"terminate:ctrl_alt_bksp\".

* Added symbol versioning for libxkbcommon and libxkbcommon-x11.
Note: binaries compiled against this and future versions will not
be able to link against the previous versions of the library.

* Removed several compatablity symbols from the binary (the API
isn\'t affected). This affects binaries which:
1. Were compiled against a pre-stable (<0.2.0) version of
libxkbcommon, and
2. Are linked against the this or later version of libxkbcommon.
Such a scenario is likely to fail already.

* If Xvfb is not available, the x11comp test is now correctly
skipped instead of hanging.

* Benchmarks were moved to a separate bench/ directory.

* Build fixes from OpenBSD.

* Fixed a bug where key type entries such as \"map[None] = Level2;\"
were ignored.

* New API:

Thu Sep 11 14:00:00 2014
- Add commentary about upcoming symbol version support to
.spec file.

Tue Sep 9 14:00:00 2014
- Switch to library versioning as described in Shared Library
Packaging guidelines. This permits installation of multiple

Thu Aug 21 14:00:00 2014
- Update to version 0.4.3:
+ Fixed a bug which caused xkb_x11_keymap_new_from_device() to
misrepresent modifiers for some keymaps.
+ Fixed a bug which caused xkb_x11_keymap_new_from_device() to
ignore XKB PrivateAction\'s.
+ Modifiers are now always fully resolved after
xkb_state_update_mask(). Previously the given state components
were used as-is, without considering virtual modifier mappings.
Note: this only affects non-standard uses of
+ Added a test for xkbcommon-x11, \"x11comp\". The test uses the
system\'s Xvfb server and xkbcomp. If they do not exist or fail,
the test is skipped.
+ Fixed memory leaks after parse errors in the XKB yacc parser.
+ The fix required changes which are currently incompatible with

Thu Jul 24 14:00:00 2014
- Add symbol versioning to xkbcommon

Wed May 21 14:00:00 2014
- Update to new upstream release 0.4.2

* Fixed a bug where explicitly passing \"--enable-x11\" to ./configure
would in fact disable it (regressed in 0.4.1).

* Added AATTsince version annotations to the API documentation for everything
introduced after the initial stable release (0.2.0).

* Added a section to the documentation about keysym transformations, and
clarified which functions perform a given transformation.

* XKB files which fail to compile during keymap construction can no longer
have any effect on the resulting keymap: changes are only applied when
the entire compilation succeeds.
Note: this was a minor correctness issue inherited from xkbcomp.

* Fix an out-of-bounds array access in src/x11/util.c:adopt_atoms()
error-handling code.
Note: it seems impossible to trigger in the current code since the input
size cannot exceed the required size.
- Add back -enable-x11 flag for 1315+

Wed Apr 9 14:00:00 2014
- Add COPYING and NEWS to files list

Tue Apr 8 14:00:00 2014
- Replace %suse_version >= 1320 to 1315 in order to build -x11 package
for SLE12

Fri Apr 4 14:00:00 2014
- Update to new upstream release 0.4.1

* Added two new functions, xkb_state_key_get_utf{8,32}(). They
combine the operations of xkb_state_key_get_syms() and
xkb_keysym_to_utf{8,32}(), and provide a nicer interface for it
(espcially for multiple-keysyms-per-level).

* The xkb_state_key_get_utf{8,32}() functions now apply Control
transformation: when the Control modifier is active, the string
is converted to an appropriate control character.
This matches the behavior of libX11\'s XLookupString(3), and
required by the XKB specification:

* The consumed modifiers for a key are now calculated similarly
to libX11. The previous behavior caused a bug where Shift would
not cancel an active Caps Lock.

* Make xkbcommon-x11 work with the keymap reported by the XQuartz
X server. fdo#75798

* Reduce memory usage during keymap compilation some more.

* New API:

* Deprecated API:
use XKB_KEYMAP_NO_FLAGS instead.
- Temporary ommit passing --enable-x11 flag, this release has a bug
that actually disables x11 if explicitly enabled (fixed upstream,
but used this approach instead of cherry-picking the patch, for
the sake of avoiding three new BuildRequires & autoreconf)

Sat Mar 8 13:00:00 2014
- Update to new upstream release 0.4.0

* Add a new add-on library, xkbcommon-x11, to support creating
keymaps with the XKB X11 protocol, by querying the X server
directly. See the xkbcommon/xkbcommon-x11.h header file for
more details. This library requires libxcb-xkb >= 1.10, and
is enabled by default. It can be disabled with the --disable-x11
configure switch. Distributions are encouraged to split the
necessary files for this library (,
xkbcommon-x11.pc, xkbcommon/xkbcommon-x11.h) to a separate
package, such that the main package does not depend on
X11 libraries.

* Fix the keysym <-> name lookup table to not require huge
amounts of relocations.

* Fix a bug in the keysym <-> name lookup, whereby lookup
might fail in some rare cases.

* Reduce memory usage during keymap compilation.

* New API:
New keysyms from xproto 7.0.25 (German T3 layout keysyms).
XKB_MOD_NAME_NUM for the usual NumLock modifier.
* types and functions, XKB_X11_
* constants.
- Add and build new libxkbcommon-x11-0 and libxkbcommon-x11-devel
packages for openSUSE 13.2 and newer

Wed Apr 17 14:00:00 2013
- Update to new upstream release 0.3.0

* This introduces the xkb_keymap_new_from_buffer API, relaxes
restrictions on the xkb_keymap_new_from_names API, introduces
support for setting default keymaps from the environment, and
includes several new bugfixes, as well as swathes of testing

Tue Oct 23 14:00:00 2012
- Update to first tarball release 0.2.0

Tue Sep 25 14:00:00 2012
- specfile cleanup

Thu Nov 11 13:00:00 2010
- Initial package