MAN page from Mandrake Other pcmcia-cs-3.0.0-1.i386.rpm
AHA152X_CS
Section: Devices and Network Interfaces (4)
Updated: 1997/09/08 02:13:01
Index NAME
aha152x_cs - Adaptec AHA-152X compatible PCMCIA device driver
SYNOPSIS
insmod aha152x_cs.o[
pc_debug=n][
irq_list=i,j,...][
host_id=n][
reconnect=n][
parity=n][
synchronous=n][
reset_delay=n][
ext_trans=n]
DESCRIPTION
aha152x_csis the low-level Card Services driver for various PCMCIA SCSI adaptersthat are compatible with the Adaptec AHA-152X host adapter. Theseinclude the New Media Bus Toaster, the Adaptec AHA-1460, and variousother OEM cards.
PARAMETERS
- pc_debug=n
- Selects the PCMCIA debugging level. This parameter is only availableif the module is compiled with debugging enabled. A non-zero valueenables debugging.
- irq_list=i,j,...
- Specifies the set of interrupts that may be allocated by this driver.
- host_id=n
- Specifies the SCSI ID of the host adapter. The default host ID is 7.
- reconnect=n
- Enables support for disconnect/reconnect, if non-zero.The default is 1 (true).
- parity=n
- Enables SCSI parity checking. The default is 1 (true).
- synchronous=n
- Enables negotiation of synchronous SCSI transfers.The default is 0 (false).
- reset_delay=n
- Specifies a delay for SCSI bus resets, in 10 millisecond intervals.The default is 100.
- ext_trans=n
- Enables the ``extended translation'' scheme for partition tables ofdrives larger than 1 GB.
AUTHOR
David Hinds - dhindsAATTallegro.stanford.edu
SEE ALSO
cardmgr(8),
pcmcia(5).
Index
- NAME
- SYNOPSIS
- DESCRIPTION
- PARAMETERS
- AUTHOR
- SEE ALSO
This document was created byman2html,using the manual pages.
