MAN page from Mandriva 2009 AfterStep-2.2.4-2mdv2009.0.i586.rpm
transform
Section: AfterStep X11 window manager (1)
Updated: AfterStep v.2.2.4
Index NAME
transform - transformations available for ASImageslibAfterImage/transform.h
NAMEtransform
SYNOPSIS
Defines transformations that could be performed on ASImage.
DESCRIPTION
Transformations can be performed with different degree of quality.Internal engine uses 24.8 bits per channel per pixel. As the resultthere are no precision loss, while performing complex calculations.Error diffusion algorithms could be used to transform it back into 8bit without quality loss.Any Transformation could be performed with the result written directlyinto XImage, so that it could be displayed faster.Complex interpolation algorithms are used to perform scalingoperations, thus yielding very good quality. All the transformationsare performed in integer math, with the result of greater speeds.Optional MMX inline assembly has been incorporated into someprocedures, and allows to achieve considerably better performance oncompatible CPUs.
SEE ALSO
Transformations : scale_asimage(), tile_asimage(), merge_layers(), make_gradient(), flip_asimage(), mirror_asimage(), pad_asimage(), blur_asimage_gauss(), fill_asimage(), adjust_asimage_hsv() Other libAfterImage modules : ascmap.h asfont.h asimage.h asvisual.h blender.h export.h import.h transform.h ximage.h
AUTHOR
Sasha Vasko <sasha at aftercode dot net>
NAMEscale_asimage()
- scales source ASImage into new image of requested dimensions.
SYNOPSIS
ASImage *scale_asimage( struct ASVisual *asv, ASImage *src, unsigned int to_width, unsigned int to_height, ASAltImFormats out_format, unsigned int compression_out, int quality );
INPUTS
- asv
- - pointer to valid ASVisual structure
- src
- - source ASImage
- to_width
- - desired width of the resulting image
- to_height
- - desired height of the resulting image
- out_format
- - optionally describes alternative ASImage format that should be produced as the result - XImage, ARGB32, etc.
- compression_out-
- compression level of resulting image in range 0-100.
- quality
- - output quality
RETURN VALUE
returns newly created and encoded ASImage on success, NULL of failure.
DESCRIPTION
If size has to be reduced - then several neighboring pixels will be averaged into single pixel. If size has to be increased then new pixels will be interpolated based on values of four neighboring pixels.
EXAMPLE
ASScale
NAMEtile_asimage()
- tiles/crops ASImage to desired size, while optionaly tinting it at the same time.
SYNOPSIS
ASImage *tile_asimage ( struct ASVisual *asv, ASImage *src, int offset_x, int offset_y, unsigned int to_width, unsigned int to_height, ARGB32 tint, ASAltImFormats out_format, unsigned int compression_out, int quality );
INPUTS
- asv
- - pointer to valid ASVisual structure
- src
- - source ASImage
- offset_x
- - left clip margin
- offset_y
- - right clip margin
- to_width
- - desired width of the resulting image
- to_height
- - desired height of the resulting image
- tint
- - ARGB32 value describing tinting color.
- out_format
- - optionally describes alternative ASImage format that should be produced as the result - XImage, ARGB32, etc.
- compression_out-
- compression level of resulting image in range 0-100.
- quality
- - output quality
RETURN VALUE
returns newly created and encoded ASImage on success, NULL of failure.
DESCRIPTION
Offset_x and offset_y define origin on source image from whichtiling will start. If offset_x or offset_y is outside of the imageboundaries, then it will be reduced by whole number of image sizes tofit inside the image. At the time of tiling image will be tintedunless tint == 0.
EXAMPLE
ASTile
NAMEmerge_layers()
SYNOPSIS
ASImage *merge_layers ( struct ASVisual *asv, ASImageLayer *layers, int count, unsigned int dst_width, unsigned int dst_height, ASAltImFormats out_format, unsigned int compression_out, int quality);
INPUTS
- asv
- - pointer to valid ASVisual structure
- layers
- - array of ASImageLayer structures that will be rendered one on top of another. First element corresponds to the bottommost layer.
- dst_width
- - desired width of the resulting image
- dst_height
- - desired height of the resulting image
- out_format
- - optionally describes alternative ASImage format that should be produced as the result - XImage, ARGB32, etc.
- compression_out
- - compression level of resulting image in range 0-100.
- quality
- - output quality
RETURN VALUE
returns newly created and encoded ASImage on success, NULL of failure.
DESCRIPTION
merge_layers() will create new ASImage of requested size. It will thengo through all the layers, and fill image with composition.Bottommost layer will be used unchanged and above layers will besuperimposed on it, using algorithm specified in ASImageLayerstructure of the overlaying layer. Layers may have smaller sizethen destination image, and maybe placed in arbitrary locations. Eachlayer will be padded to fit width of the destination image with all 0effectively making it transparent.
NAMEmake_gradient()
- renders linear gradient into new ASImage
SYNOPSIS
ASImage *make_gradient ( struct ASVisual *asv, struct ASGradient *grad, unsigned int width, unsigned int height, ASFlagType filter, ASAltImFormats out_format, unsigned int compression_out, int quality);
INPUTS
- asv
- - pointer to valid ASVisual structure
- grad
- - ASGradient structure defining how gradient should be drawn
- width
- - desired width of the resulting image
- height
- - desired height of the resulting image
- filter
- - only channels corresponding to set bits will be rendered.
- out_format
- - optionally describes alternative ASImage format that should be produced as the result - XImage, ARGB32, etc.
- compression_out-
- compression level of resulting image in range 0-100.
- quality
- - output quality
RETURN VALUE
returns newly created and encoded ASImage on success, NULL of failure.
DESCRIPTION
make_gradient() will create new image of requested size and it willfill it with gradient, described in structure pointed to by grad.Different dithering techniques will be applied to produce nicerlooking gradients.
NAMEflip_asimage()
- rotates ASImage in 90 degree increments
SYNOPSIS
ASImage *flip_asimage ( struct ASVisual *asv, ASImage *src, int offset_x, int offset_y, unsigned int to_width, unsigned int to_height, int flip, ASAltImFormats out_format, unsigned int compression_out, int quality );
INPUTS
- asv
- - pointer to valid ASVisual structure
- src
- - source ASImage
- offset_x
- - left clip margin
- offset_y
- - right clip margin
- to_width
- - desired width of the resulting image
- to_height
- - desired height of the resulting image
- flip
- - flip flags determining degree of rotation.
- out_format
- - optionally describes alternative ASImage format that should be produced as the result - XImage, ARGB32, etc.
- compression_out
- - compression level of resulting image in range 0-100.
- quality
- - output quality
RETURN VALUE
returns newly created and encoded ASImage on success, NULL of failure.
DESCRIPTION
flip_asimage() will create new image of requested size, it will thentile source image based on offset_x, offset_y, and destination size,and it will rotate it then based on flip value. Three rotation anglessupported 90, 180 and 270 degrees.
NAMEmirror_asimage()
SYNOPSIS
ASImage *mirror_asimage ( struct ASVisual *asv, ASImage *src, int offset_x, int offset_y, unsigned int to_width, unsigned int to_height, Bool vertical, ASAltImFormats out_format, unsigned int compression_out, int quality );
INPUTS
- asv
- - pointer to valid ASVisual structure
- src
- - source ASImage
- offset_x
- - left clip margin
- offset_y
- - right clip margin
- to_width
- - desired width of the resulting image
- to_height
- - desired height of the resulting image
- vertical
- - mirror in vertical direction.
- out_format
- - optionally describes alternative ASImage format that should be produced as the result - XImage, ARGB32, etc.
- compression_out
- - compression level of resulting image in range 0-100.
- quality
- - output quality
RETURN VALUE
returns newly created and encoded ASImage on success, NULL of failure.
DESCRIPTION
mirror_asimage() will create new image of requested size, it will thentile source image based on offset_x, offset_y, and destination size,and it will mirror it in vertical or horizontal direction.
NAMEpad_asimage()
enlarges ASImage, padding it with specified color on each side in accordance with requested geometry.
SYNOPSIS
ASImage *pad_asimage( ASVisual *asv, ASImage *src, int dst_x, int dst_y, unsigned int to_width, unsigned int to_height, ARGB32 color, ASAltImFormats out_format, unsigned int compression_out, int quality );
INPUTS
- asv
- - pointer to valid ASVisual structure
- src
- - source ASImage
- dst_x,
- dst_y - placement of the source image relative to the origin of destination image
- to_width
- - width of the destination image
- to_height
- - height of the destination image
- color
- - ARGB32 color value to pad with.
- out_format
- - optionally describes alternative ASImage format that should be produced as the result - XImage, ARGB32, etc.
- compression_out
- - compression level of resulting image in range 0-100.
- quality
- - output quality
RETURN VALUE
returns newly created and encoded ASImage on success, NULL of failure.
NAMEblur_asimage_gauss()
Performs Gaussian blurr of the image ( usefull for drop shadows and the likes ).
SYNOPSIS
ASImage* blur_asimage_gauss( ASVisual* asv, ASImage* src, double horz, double vert, ASAltImFormats out_format, unsigned int compression_out, int quality );
INPUTS
- asv
- - pointer to valid ASVisual structure
- src
- - source ASImage
- horz
- - horizontal radius of the blurr
- vert
- - vertical radius of the blurr
- out_format
- - optionally describes alternative ASImage format that should be produced as the result - XImage, ARGB32, etc.
- compression_out
- - compression level of resulting image in range 0-100.
- quality
- - output quality
RETURN VALUE
returns newly created and encoded ASImage on success, NULL of failure.
NAMEfill_asimage()
- Fills rectangle within the existing ASImage with specified color.
SYNOPSIS
Bool fill_asimage( ASVisual *asv, ASImage *im, int x, int y, int width, int height, ARGB32 color );
INPUTS
- asv
- - pointer to valid ASVisual structure
- im
- - ASImage to fill with the color
- x,
- y - left-top corner of the rectangle to fill.
- width,
- height - size of the rectangle to fill.
- color
- - ARGB32 color value to fill rectangle with.
RETURN VALUE
True on success, False on failure.
NAMEadjust_asimage_hsv()
- adjusts image color properties in HSV colorspace
SYNOPSIS
ASImage *adjust_asimage_hsv( ASVisual *asv, ASImage *src, int offset_x, int offset_y, unsigned int to_width, unsigned int to_height, unsigned int affected_hue, unsigned int affected_radius, int hue_offset, int saturation_offset, int value_offset, ASAltImFormats out_format, unsigned int compression_out, int quality);
INPUTS
- asv
- - pointer to valid ASVisual structure
- src
- - ASImage to adjust colors of.
- offset_x,
- offset_y
- - position on infinite surface tiled with original image, of the left-top corner of the area to be used for new image.
- to_width,
- to_height
- - size of the area of the original image to be used for new image.
- affected_hue
- - hue in degrees in range 0-360. This allows to limit impact of color adjustment to affect only limited range of hues.
- affected_radius
- Sets the diapason of the range of affected hues.
- hue_offset
- - value by which to change hues in affected range.
- saturation_offset
- - value by which to change saturation of the pixels in affected hue range.
- value_offset
- - value by which to change Value(brightness) of pixels in affected hue range.
- out_format
- - optionally describes alternative ASImage format that should be produced as the result - XImage, ARGB32, etc.
- compression_out-
- compression level of resulting image in range 0-100.
- quality
- - output quality
RETURN VALUE
returns newly created and encoded ASImage on success, NULL of failure.
DESCRIPTION
This function will tile original image to specified size with offsetsrequested, and then it will go though it and adjust hue, saturation andvalue of those pixels that have specific hue, set by affected_hue/affected_radius parameters. When affected_radius is greater then 180entire image will be adjusted. Note that since grayscale colors haveno hue - the will not get adjusted. Only saturation and value will beadjusted in gray pixels.Hue is measured as an angle on a 360 degree circle, The following isrelationship of hue values to regular color names :red - 0yellow - 60green - 120cyan - 180blue - 240magenta - 300red - 360All the hue values in parameters will be adjusted to fall withing0-360 range.
NAMEcolorize_asimage_vector()
creates ASImage from double precision indexed image data - usefull for scientific visualisation.
SYNOPSIS
Bool colorize_asimage_vector( ASVisual *asv, ASImage *im, ASVectorPalette *palette, ASAltImFormats out_format, int quality );
INPUTS
- asv
- - pointer to valid ASVisual structure
- im
- - ASImage to update.
- palette
- - palette to be used in conversion of double precision values into colors.
- out_format
- - optionally describes alternative ASImage format that should be produced as the result - XImage, ARGB32, etc.
- quality
- - output quality
RETURN VALUE
True on success, False on failure.
DESCRIPTION
This function will try to convert double precision indexed image datainto actuall color image using palette. Original data should be attached to ASImage using vector member. Operation is relatively fast and allows representation of scientific data as color image with dynamically changing palette.
NAMEcreate_asimage_from_vector()
- convinience function allowing to create new ASImage, set its vector data and colorize it using palette - all in one step.
SYNOPSIS
ASImage *create_asimage_from_vector( ASVisual *asv, double *vector, unsigned int width, unsigned int height, ASVectorPalette *palette, ASAltImFormats out_format, unsigned int compression, int quality );
INPUTS
- asv
- - pointer to valid ASVisual structure
- vector
- - data to be attached to new ASImage and used to generate RGB image
- width,
- height - size of the new image.
- palette
- - palette to be used in conversion of double precision values into colors.
- out_format
- - optionally describes alternative ASImage format that should be produced as the result - XImage, ARGB32, etc.
- compression_out-
- compression level of resulting image in range 0-100.
- quality
- - output quality
RETURN VALUE
New ASImage on success, NULL on failure.
SEE ALSO
colorize_asimage_vector(), create_asimage(), set_asimage_vector()
Index
- NAME
- NAMEtransform
- SYNOPSIS
- DESCRIPTION
- SEE ALSO
- AUTHOR
- NAMEscale_asimage()
- SYNOPSIS
- INPUTS
- RETURN VALUE
- DESCRIPTION
- EXAMPLE
- NAMEtile_asimage()
- SYNOPSIS
- INPUTS
- RETURN VALUE
- DESCRIPTION
- EXAMPLE
- NAMEmerge_layers()
- SYNOPSIS
- INPUTS
- RETURN VALUE
- DESCRIPTION
- NAMEmake_gradient()
- SYNOPSIS
- INPUTS
- RETURN VALUE
- DESCRIPTION
- NAMEflip_asimage()
- SYNOPSIS
- INPUTS
- RETURN VALUE
- DESCRIPTION
- NAMEmirror_asimage()
- SYNOPSIS
- INPUTS
- RETURN VALUE
- DESCRIPTION
- NAMEpad_asimage()
- SYNOPSIS
- INPUTS
- RETURN VALUE
- NAMEblur_asimage_gauss()
- SYNOPSIS
- INPUTS
- RETURN VALUE
- NAMEfill_asimage()
- SYNOPSIS
- INPUTS
- RETURN VALUE
- NAMEadjust_asimage_hsv()
- SYNOPSIS
- INPUTS
- RETURN VALUE
- DESCRIPTION
- NAMEcolorize_asimage_vector()
- SYNOPSIS
- INPUTS
- RETURN VALUE
- DESCRIPTION
- NAMEcreate_asimage_from_vector()
- SYNOPSIS
- INPUTS
- RETURN VALUE
- SEE ALSO
This document was created byman2html,using the manual pages.
