SEARCH
NEW RPMS
DIRECTORIES
ABOUT
FAQ
VARIOUS
BLOG
DONATE


YUM REPOSITORY

 
 

MAN page from CentOS Other fence-agents-azure-arm-4.2.1-74.el8.noarch.rpm

FENCE_AGENT

Section: Maintenance Commands (8)
Updated: 2009-10-20
Index 

NAME

fence_azure_arm - Fence agent for Azure Resource Manager 

DESCRIPTION

fence_azure_arm is an I/O Fencing agent for Azure Resource Manager. It uses Azure SDK for Python to connect to Azure.For instructions to setup credentials see: https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-create-service-principal-portalUsername and password are application ID and authentication key from "App registrations".NOTE: NETWORK FENCING
Network fencing requires an additional Subnet named "fence-subnet" for the Virtual Network using a Network Security Group with the following rules:
+-----------+-----+-------------------------+------+------+-----+-----+--------+
| DIRECTION | PRI | NAME | PORT | PROT | SRC | DST | ACTION |
+-----------+-----+-------------------------+------+------+-----+-----+--------+
| Inbound | 100 | FENCE_DENY_ALL_INBOUND | Any | Any | Any | Any | Deny |
| Outbound | 100 | FENCE_DENY_ALL_OUTBOUND | Any | Any | Any | Any | Deny |
+-----------+-----+-------------------------+------+------+-----+-----+--------+When using network fencing the reboot-action will cause a quick-return once the network has been fenced (instead of waiting for the off-action to succeed). It will check the status during the monitor-action, and request power-on when the shutdown operation is complete.fence_azure_arm accepts options on the command line as wellas from stdin. Fenced sends parameters through stdin when it execs theagent. fence_azure_arm can be run by itself with commandline options. This is useful for testing and for turning outlets on or offfrom scripts.

Vendor URL: http://www.microsoft.com 

PARAMETERS

        

-o, --action=[action]
Fencing action (Default Value: reboot)        
        
        
        
-p, --password=[authkey]
Authentication key        
-S, --password-script=[script]
Script to run to retrieve password        
-n, --plug=[id]
Physical plug number on device, UUID or identification of machine This parameter is always required.        
        
-l, --username=[appid]
Application ID        
--resourceGroup=[name]
Name of resource group. Metadata service is used if the value is not provided.        
--tenantId=[name]
Id of Azure Active Directory tenant.        
--subscriptionId=[name]
Id of the Azure subscription. Metadata service is used if the value is not provided.        
        
--network-fencing
Use network fencing. See NOTE-section for configuration.        
--msi
Determines if Managed Service Identity should be used.        
--cloud=[name]
Name of the cloud you want to use.        
-q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.        
-v, --verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.        
--verbose-level
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).        
        
-D, --debug-file=[debugfile]
Write debug information to given file        
-V, --version
Display version information and exit        
-h, --help
Display help and exit        
-C, --separator=[char]
Separator for CSV created by 'list' operation (Default Value: ,)        
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)        
--disable-timeout=[true/false]
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)        
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)        
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 150)        
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)        
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)        
--stonith-status-sleep=[seconds]
Sleep X seconds between status calls during a STONITH action (Default Value: 1)        
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)

 

ACTIONS

        

on
Power on machine.        
off
Power off machine.        
reboot
Reboot machine.        
status
This returns the status of the plug/virtual machine.        
list
List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.        
list-status
List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.        
monitor
Check the health of fence device        
metadata
Display the XML metadata describing this resource.        
manpage

 The operational behavior of this is not known.        
validate-all
Validate if all required parameters are entered.

 

STDIN PARAMETERS

        

action
Fencing action (Default Value: reboot)        
        
        
        
password
Authentication key Obsoletes: passwd        
password_script
Script to run to retrieve password Obsoletes: passwd_script        
plug
Physical plug number on device, UUID or identification of machine This parameter is always required. Obsoletes: port        
        
username
Application ID Obsoletes: login        
resourceGroup
Name of resource group. Metadata service is used if the value is not provided.        
tenantId
Id of Azure Active Directory tenant.        
subscriptionId
Id of the Azure subscription. Metadata service is used if the value is not provided.        
        
network_fencing
Use network fencing. See NOTE-section for configuration. Obsoletes: network-fencing        
msi
Determines if Managed Service Identity should be used.        
cloud
Name of the cloud you want to use.        
quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.        
verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.        
verbose_level
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).        
        
debug_file
Write debug information to given file Obsoletes: debug        
version
Display version information and exit        
help
Display help and exit        
separator
Separator for CSV created by 'list' operation (Default Value: ,)        
delay
Wait X seconds before fencing is started (Default Value: 0)        
disable_timeout
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)        
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)        
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 150)        
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)        
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)        
stonith_status_sleep
Sleep X seconds between status calls during a STONITH action (Default Value: 1)        
retry_on
Count of attempts to retry power on (Default Value: 1)


 

Index

NAME
DESCRIPTION
PARAMETERS
ACTIONS
STDIN PARAMETERS

This document was created byman2html,using the manual pages.