MAN page from openSUSE Leap 15 kdrill-6.5-lp150.1.1.x86_64.rpm

KDRILL

Section: User Commands (1)
Updated: Auguest 21st, 2003
Index

NAME

kdrill v6.2 - drill program for kanji chars under Xwindows (X11R5 or better is required to run)kdrill also does dictionary lookup

Yikes.. this man-page is getting huge. But I am a great believer inhaving proper documentation. Hopefully, this new format will help insteadof hinder.

At some future point in time, I shall convert this huge beast to HTML. Butthat point is not now.[Although actually, you CAN go to http://www.bolthole.com/kdrill/ for
some help ]

TIP: "/WORD" usually takes you to the next occurrence of "WORD",if you are viewing this using a "man"-like program.

SECTIONS (of this man page)

RUNTIME OPTIONS
RESOURCES
DESCRIPTION
PLAYING
PLAYING OPTIONS
LEARNING NEW CHARS
USEFILES
SEARCH
KEYBOARD ACCELERATORS
CONFIGURATION DETAILS
LOGFILES AND MISSED KANJI
KANJIDIC and EDICT

RUNTIME OPTIONS

[Note: most of these options are now somewhat redundant. Kdrill now auto-saves
its options. But just in case you want to know about these commandline
options...]

-usefile NewUsefileName: Change name of usefile, which lets you drill on specific characters.
-nousefile: Still read in usefile if it exists, but ignore it at startup.
-kdictfile OtherKanjidicFile: Use a different dictionary file name. You may have "hira.dic" or "kata.dic"installed, as well as "kanjidic", for example.
-edictfile OtherKanjidicFile: Use a different edict-style-dictionary file name. "none" for no edict.
-englishfont FontName: Changes only english display of english-guess buttons.
-kanjifont KanjiFontName: Change large kanji font.
-smallkanji KanjiFontName: Change small kanji/kana font for kana-guess buttons.
-noBell: Turns off beep on wrong answer.
-guessmode: say whether you want the guess choices to be in "english", "kanji", or "kana"
-questionmode: say whether you want the 'question' to be in "english", "kanji", or "kana"
-showinorder: Start in ordered mode. Go through desired kanji in order of #.
-gradelevel <level #s>: Start with different grade levels enabled. A string with one or more of [123456+]
-showkana: Start with kana meanings instead of english.
-lowfrequency #, -highfrequency #: Set lowest and/or highest frequency kanji you want to see.
-logfile filename: Change filename to log current errors to (with "Log" button)
-notallT: Don't insist that all dictionary entries have kana AND English.WARNING! Normal operation is to ignore incomplete entries, andthereby enable switching from kana to english without changing the quizkanji. Using this option will make kdrill move to another kanji if youswitch kana to English or vica versa.
[: default behaviour currently loses 300 kanji, with the kanjidicfile I have currently. All characters with Frequency ratings have fulltranslations. ]

RESOURCES

Kdrill now saves config options in $HOME/.kdrill, in X-resource format.The latest configuration will automatically be saved when you quitkdrill normally.If you want to change kdrill's settings, and you dont see a way to do itin the options popup, you can probably change it in the global "KDrill" resource file, or in your personal "$HOME/.kdrill" file.See the sample "KDrill" file for more detail, which isoften installed in /usr/lib/X11/app-defaults/KDrill, or someplace similar.Values in $HOME/.kdrill will override the global settings.

Colors

You may change the background of the windows using a resource file,as mentioned above.

DESCRIPTION

kdrillis a program to drill users on meanings of kanji characters. Variousformats of drills are available:

   kanji   --\ /--- kanji
   kana     --*--   kana
   english --/ \--  english

PLAYING

kdrill will present you with a kanji (or kana or english phrase)and five possible meanings for it. Your goal is to guess whichone matches the kanji at the top. Initially, it will choose randomly from theentire dictionary, so you will probably want to narrow the range, viathe OPTIONS section, below.

Any grade level or frequency rating the current kanji has will bedisplayed in the top right hand side of the window, next to the "G:" and"F:" letters. The kanji index number will be displayed after the "#:" sign.

Click with your primary mouse button (usually the left one) on one of the multiple-choiceanswered to see how well you know the lone kanji or meaning. You mayalso use the number keys to make your choice.[1,2,3,4,5]

If you guess correctly, you will move on to another character. If youguess incorrectly, you will have to guess again. Furthermore, kdrill willmake a note that you didn't know either the character displayed, or thecharacter for the incorrect meaning you clicked on.

If you are playing in random order, kdrill will randomly repeat the onesyou have missed. You will have to get a missed character right twice forkdrill to think you know it. If you miss a character more than once, youwill have to repeat the character two times the number of times youmissed it. If you are playing in order, kdrill will keep to theorder, and not go back. It will still remember ones you have missed,however, and will go back to them if you later switch to random order.

There are two ways of "cheating", if you are learning new characters, anddon't want to have an incorrect guess recorded. One way is to press the"cheat" button, and the correct answer will be highlighted. The other wayis to make a guess with button 2 on your mouse. The characterof the one you clicked on will appear in the search window.If the search window was not already open, it will appear when you dothis.

PLAYING OPTIONS

If you want to change the way the game works while playing, you can bringup the options window by pressing the options button. If you know how youwant the game to play before starting it, you can most likely do what youwant with a command-line option, described at the top of thisman-page. If you want to permanently change an option, see the"RESOURCES" header, above.

The following options are to help narrow down the range of kanji youget quizzed on.

Grades

You may specify which grade levels you wish to study, by clicking on thebuttons labeled: "1", "2", "3", "4", "5", "6", "+", or "All", in the"Grade Select" window. You may also select/unselect a grade by holdingdown shift, followed by "1", "2", "3", "4", "5", "6", "+", or "a", in themain window.

The "All" feature will select all grades. but it will not unselect them.

The default is to have all the grades enabled.

Frequency

Some kanji have frequency ratings. That means that, in real life, somekanji are used more frequently than others. Frequency rating 1 means thatthis is the most frequently used character. The frequency of the true answer you are guessing will be displayed inthe top right of the main window, next to the "F:" sign, if a frequencyrating exists.

The frequency range area in the options window allows you to limit thekanji you see based on their frequency rating. The frequency range areaconsists of two smaller input areas; "High", and "Low". Highmeans a kanji that is high frequency. That is to say, something that isused often. According to the definitions of the dictionary, "1" means thekanji that is used the most often. A frequency rating of "2" meansthat the character has a lower frequency than "1". The mostfrequently used kanji is the character for "day", which is "F: 1".

Setting a number in the "High" window limits high frequency kanji.If there is a number in the "High" window, that means that you will see nokanji that is of higher frequency than that number. Similarly, setting anumber in the "Low" window means that you will see no kanji of frequencylower than that number. 2000 is a "Low" frequency kanji. If you put 2000in the "Low" area, you would see nothing of lower frequency than thecharacter rated at 2000 (which happens to be "hazy")that you would see nothing

A blank in the "High" or "Low" fields indicates no limit in the field. Ifyou try to set either window to "0", it will automatically set itselfblank for you.

Order

It is possible to be drilled on kanji in order, without repetition, until"all" kanji have been covered. Any restrictions on grade level orfrequency will still apply. To enable or disable ordering, click on the"Showing randomly" (or "Showing in order") button in the options window.

Note that "in order" does not mean in order of frequency. It meansin the order represented by the dictionary, denoted by the '#' numbershown at top right. This happens to be the JIS-encoding of the Kanji,which we also call the kanji index.

TIP: A good way to start learning a range of chars, is to select the

"in order" option, and a particular grade level and/or frequency range. Press 'C' (Shift-c) for super-cheat. This will both highlight the correctanswer, AND show the full kanji+kana+english meanings in the popupsearch window!

When you have looked at it enough, click on the correct answer to move on tothe next kanji.

Or rather than use the super-cheat option repeatedly... Read the next section.

LEARNING NEW CHARS

If you would like a small little window to memorize new chars in, instead ofthe bulkier 'main' or 'search' windows, there is now a 'learn' window.Pressing the (learn) button on the main window will bring up the learn window, which only displays kanji, kana, and english meanings of a char.Pressing one of the 'next' buttons will select a new char for you to look at, using the same rules of choosing that the main window uses.(grade levels, and an optional usefile)

USEFILES

A usefile is a way to tell kdrill "I want to be quizzed on thesekanji, and ONLY these specific kanji". Generally speaking, it iseasier to just pick a particular grade level or frequency range toquiz yourself on. But if you know you want specific kanji (forexample, to study for a class!) having a usefile is very useful.

Grade and Frequency restrictions will apply, even if you have ausefile. Thus, if all your usefile-defined kanji are of grade 4 orhigher, and you have only selected grades 3 and lower, kdrill willcomplain that there are not enough kanji available, and attempt to addviewable grade levels until there are enough value kanji to quiz on

To add or remove a kanji from the "usefile", pull up the searchwindow, and view a particular kanji. The "usefile" button at the farright will be highlighted if it is in the usefile list. You can togglethe button to set the status as you wish.

If you want to see all the kanji in your usefile, click on the "show"button, below the "usefile" toggle, in the search window. It will thenshow you the current list, and pressing on one will display it in thesearch window. You can then remove it via the "usefile" toggle if you like.

When you quit kdrill, it will update the usefile, IF you have a minimum numberin the list (currently, 10). If you want to know if you have enough, use the options window to toggle "No Usefile" to "Using Usefile". It willnot let you, if there are not enough characters in the list.

If you wish kdrill to ignore your usefile when you start it up, you may use the-nousefile option.

Usefile format

If you want to edit a usefile by hand, this is the format:

A usefile consists of a list of hex numbers; one per line, no initialspaces allowed. A usefile lets the program know you are interested incertain kanji, from the thousands listed in the dictionary.It is possible to add comment lines by having the very first characterof a line be "#". However, those will be overwritten if you make changesfrom within the program.Hex numbers can be checked or found by using the "xfd" util on the "kanji24" font. Alternatively, you could use the search window or main kdrill window.In on of the "#" input boxes, type in "0x", and then the hex number.It is best to do this in the search window, since the main window mayhave range restrictions on it.

SEARCH

It is now possible to search for a character in kdrill. You may search foran English phrase, a kana phrase, or a particular kanji.

kdrill will automatically show the first match. If there is more than onematch, it will be shown in a secondary popup window.That window can be changed to display the english, kanji, or kana meaning ofeach dictionary entry. Click on one to have it displayed in the main searchwindow.

Additionally, if a search turns up a kanji phrase instead of a single kanji,you may click on the phrase at the top of the search window, to have thesecondary multi-listing window display the individual kanji for you to examinein further detail.

English search

First, bring up the search window by pressing the search button. Then,enter an English word (or fragment) in the bottom-most section of thewindow, and press return or enter. The window will then display the firstkanji it finds that has that word in its definition, along with itsindex number, grade, and other information available, if any.

Kana search

If you want to search for a kana phrase, you now have TWO options!

For more experienced users, you can finally type in that temptingkana window. There is no little ^ cursor, but dont worry about that.DO worry about the following conventions:

  Type "n " (n,space) to convert a ending 'n' to kana
  Press "'" for small-tsu. (type "chotto" as "cho'to")
  Press "-" for kana elongation. ("bi-ru")
  Press backspace to erase the last char.
  Press return to start the search.

For a pointy-clicky method of input, press the "kana search"button. This will pop up the kana seach window. (Press it again to removethe window.) Press the kana(s) you want to search for. The chars you press will be shownnext to the "kana search" button in the main search window. When you havethe phrase ready, press the [Search] box.

If your kana recognition isn't all it should be, you can toggle romaji modein the options popup (via "options" from the main window). Additionally, ifyou don't know katakana, but want to translate a katakana phrase, use the<=> button to toggle between hiragana and katakana. Note that even if youare in katakana input mode, it will print out your buttonpresses ashiragana. This is because the search engine treats hiragana and katakanaidentically.

If you make a mistake, press the <- button, or backspace, to erase the lastchar.

The characters you press will appear at the bottom of the popup, and also onthe main search window next to the kana search button. As noted above, ifyou make a mistake typing, use the <- button on the kana window to erase, orthe backspace key.

KANJI SEARCH

You now have a multiple ways to look up Kanji.

4-corner Kanji search

If you want to find a kanji by shape, press the kanji search button onthe search window. This will bring up the kanji search window.Press it again to remove the kanji search window.

This window employes the "4-corner method" of lookup.The 4-corner method has lots of strange rules to it. I strongly recommendthat you read the description that comes in the kanjidic document file. Itis impossible for me to cover all details here.

In brief, you have to press each corner of the center box, and select one ofthe ten elements from the top row, that best matches that corner of thekanji you want to look up. For those already familiar with the4-corner method, the "blank" element is an alias for the first element.There are still only 10 possible positions.

Press the paragraph button (backwards 'P') when you are ready to search.

For those NOT already familiar with the 4-corner method... unfortunately, itsounds easy, but it is really horribly difficult, and I again refer you tothe documentation that comes with the kanjidic dictionary file. Look for"kanjidic.doc"

SKIP Kanji search

Pressing the "Kanji SKIP search" button, will bring up the SKIP window.This window has directions on it already. Follow the directions todefine what the kanji looks like.

Kanji cut-n-paste lookup

For ELECTRONIC lookup... if you view Japanese text online with a programlike "kterm", you can now select a single kanji in kterm, and paste it intoa special "drop target" in the search window. It is to the far right of the"kanji" search button.

If you highlight multiple characters, kdrill will now only look foran exact match of all characters you paste in. (up to 4 chars).Multi-char matching will NOT WORK, unless you have downloaded theadditional dictionary, "edict"

Note: There is a BUG in some versions of netscape 4.x. If you are viewingkanji in a frame, you can seemingly highlight a character, but it will notcut-n-paste to kdrill, or anywhere else. If this occurs, use right-click to"open frame in new window", where you will be able to use cut-n-paste.Cut-n-paste from netscape was also improved in version 5.9.6

MATCH SIMILAR KANJI

If you have a kanji already showing in the search window, and you are usingthe 'edict' dictionary, you can search the large dictionary for occurences ofthe current kanji. Press the "match" button next to the kanji display.

What are all those letters?

The top row; "G, F, #", all refer to the basic indexes that are shown inthe mail kdrill window. They stand for "Grade, Frequency, and Index #",respectively.

H denotes the index in the "Halperin" dictionary

N denotes the index in the "Nelson" dictionary

Ux denotes the "Unicode" of the kanji. It is Ux to make itstand out as the only one that expects input in Hexadecimal. This isbecause that is the way the dictionary has it.

For all windows with the little ^ in them, you can change the values.When you press return or enter in them, kdrill will attempt to find amatch for what you just entered. If it can find no match, it will blankout all fields displayed.

You can use this jump-to-index feature in the main window too. However,the main window will keep any restrictions you might have while doing thesearch (limits by usefile, grade, or frequency limit).

The search window ignores any restrictions on the main window, andsearches the entire on-line dictionary.

KEYBOARD ACCELERATORS

Almost everything has a keyboard shortcut in kdrill.

    Key                               Action
  1,2,3,4,5                  Make a guess
  Shift+(123456+)            Change grade levels used
  c                          (C)heat
  C                          Super(C)heat
  e                          Guess (e)nglish definision
  k                          Guess which (k)anji fits
  m                          Guess which kana (m)eaning fits
  E                          Quiz on (E)nglish
  K                          Quiz on (K)anji
  M                          Quiz on kana (M)eaning
  l                          popup (l)earn window
  n                          (n)ext char, IF in learn window
  o                          Toggle in-(o)rder drill
  O                          Bring up (O)ptions window
  p                          Go back to (p)revious
  Control+q                  (Q)uit kdrill
  u                          Toggle (u)sefile usage.
  s                          (S)earch for a Kanji
  T                          Timer start/stop
  x                          clear missed count

Additionally, the Sun keyboard "Find" (F19) and "Props" (F13) keysare bound to the search and options windows, respectively.

CONFIGURATION DETAILS

kdrill checks for a file by the name of.kanjiusefilein the current directory, although this name can be changed either withthe '-usefile' option, or in a resource file.

kdrill also checks for a logfile, namedkdrill.logby default, in the current directory. This can be changed with the-logfile option, or in a resource file. See "LOGFILES AND MISSED KANJI",below.

kdrill uses a file called "kanjidic" (which does not come in the sourcepackage) to interpret many of the various 16-bit kanji chars in thekanji24font supplied with the X11R5 distribution. This file should be in a placeaccessible to all users. Normally it would be in /usr/local/lib orsomewhere similar.

kanjidicsubdivides its entries into grade levels, and frequency ratings. Gradelevels are similar to school grade levels, but more compressed. Forkdrill's purposes, grade levels start at 1, and increase to 6. There aremany kanji that do not have a grade level, due to their infrequency ofuse, or other reasons. These are denoted by the "+" character in thegrade select window.

The user can restrict the range of kanji to drill on in different, yetcompatible, ways. The first way is to make a ".kanjiusefile" with a an explicit list of desired kanji. (described above in "USEFILES"),

Changes you make to the "Grade Select" window or the "Frequency Range"section will not do anything until you supply the correct match to thecurrent drill-question (or press the english/kana toggle button).

Keep in mind that the xfd font tool and other applications may refer tokanji characters by a hexadecimal number. You may enter ahexadecimal number by starting it with "0x". For example, "0x315c".To maintain compatibility with the dictionary, the kdrill "usefile"expects hexadecimal input, not decimal input. Similarly, the logfilealso stores kanji in hexadecimal format. This makes it easy to use a logfile of kanji you have missed as a usefile, for repeated drilling.

LOGFILES AND MISSED KANJI

Every time you guess incorrectly, kdrill makes a note. It later will giveyou extra practice on ones you missed, if you are playing in random order.It will only repeat a missed character about 25% of the time. The more you miss a particular character, the more kdrill will repeatshowing it to you.

You can store a list of your incorrect answers by pressing the "Log"button. kdrill will then write out all the kanji characters it thinks youdo not know into the logfile. This will erase any information previouslyin that logfile. kdrill will also automatically update the logfile whenit quits The next time you start up kdrill, it will automaticallyread in the logfile, if it exists.

The logfile is named "kdrill.log", by default. You may change the nameof the logfile with the -logfile option.

It is a good idea to press "Log" just before quitting kdrill.That way, it will remember which characters you are weak on, for the nexttime you play. It will then go back to those characters from time totime, if you play in "random" order. If you do not press "Log", kdrillwill not save a record of what you have missed.

Alternatively, you can use the logfile as a usefile. kdrill will thenonly quiz you on those kanji you missed. If you choose to do this, it isa good idea to copy the log file over to a different file. That way, youcan make a logfile for your new usefile. For example, in UNIX;

cp kdrill.log kdrill.usefilekdrill -usefile kdrill.usefile

The total number of missed entries is shown in the main window. If thereare just too many for your comfort (learning new kanji can be difficult!)you can ERASE THE COUNT with your backspace or delete key.

KANJIDIC and EDICT

The dictionary for kdrill, kanjidic, is currently available where itoriginated, via ftp fromftp.monash.edu.au,or from a mirror in the U.S. at ftp.uwtc.washington.edu. Likewise for the"edict" dictionary. There are many other mirror sites mentioned on thekdrill web page. (See below)

At the monash site, both the dictionary and this program can currently befound in/pub/nihongo

This program's primary ftp site is now ftp.bolthole.com.

There is also an official kdrill URL;

http://www.bolthole.com/kdrill/

This currently shows you some screen-shots, and mentions the ftp sites.

BUGS

"kanjidic" isn't perfect. There are "incomplete" entries, missing eitherEnglish or kana translations. There are also entries consisting of "SeeNxxxx", which isn't really an improvement. Note that you cannow use the search window to follow those "See Nxxxx" references![ Just search for that Nxxx, as if doing a search for English ]

Likewise, this man page may be incomplete!

AUTHOR

Philip P. Brown

(Who has finally taken a format Japanese lesson! Which helped a lot,
but am now back on the slow "self-taught" track. sigh! shikatta ga nai)

COPYRIGHT

This program was originally created while I was a student at theUniversity of California. However, this program was developed entirely bymyself, on my own computer, not related to any classwork. I retain soleright to this program.

I, Philip Brown, hereby give permission to use, and/or modify this code, solong as it it not sold for profit, and I am given credit somewhere inthe code. Unrelated works originally derived from this code are notcovered by this restriction (although it would be nice to mention me!)

NOTICE

Send donations, postcards, muffins, letters of commendation, to

:   Philip Brown
  5353 Josie Ave
  Lakewood, CA 90713
  USA

[ I HAVE received some nice email, and more is always welcome. No postcards,
though. Sniff... Although I DID actually receive a small donation.
Yaaay! I can buy more manga now! :-> ]

Bug reports always "welcome". However, please ensure that you canreproduce it, so I can fix it for you.Also, be sure to let me know your machine type, and version of kdrill youare using.

Philip Brown

philAATTbolthole.com
http://www.bolthole.com/

http://www.bolthole.com/kdrill/

Index

NAME
SECTIONS (of this man page)
RUNTIME OPTIONS
RESOURCES
Colors
DESCRIPTION
PLAYING
PLAYING OPTIONS
LEARNING NEW CHARS
USEFILES
SEARCH
KEYBOARD ACCELERATORS
CONFIGURATION DETAILS
LOGFILES AND MISSED KANJI
KANJIDIC and EDICT
BUGS
AUTHOR
COPYRIGHT
NOTICE

This document was created byman2html,using the manual pages.