SEARCH
NEW RPMS
DIRECTORIES
ABOUT
FAQ
VARIOUS
BLOG
DONATE


YUM REPOSITORY

 
 

MAN page from Fedora 3 ncurses-5.4-13.x86_64.rpm

tack

Section: Misc. Reference Manual Pages (1M)
Updated:
Index 

NAME

tack - terminfo action checker 

SYNOPSIS

tack [-itV] [term]
 

DESCRIPTION

The tack program has three purposes:(1) to help you build a new terminfo entry describing an unknown terminal,(2) to test the correctness of an existing entry, and(3) to develop the correct pad timings needed to ensure that screen updatesdon't fall behind the incoming data stream.

Tack presents a series of screen-painting and interactivetests in ways which are intended to make any mismatches between theterminfo entry and reality visually obvious. Tack also provides tools that can help in understanding howthe terminal operates. 

OPTIONS

-i
Usually tack will send the reset and init strings to the terminalwhen the program starts up. The -i option will inhibit theterminal initialization.
-t
Tell tack to override the terminfo settings for basic terminalfunctions. When this option is set tack will translate(cr) to \r, (cud1) to \n, (ind) to \n, (nel) to \r\n,(cub1) to \b, (bel) to \007, (ff) to \f and (ht) to \t.
-V
Display the version information and exit.
term
Terminfo terminal name to be tested. If not present then the $TERMenvironment variable will be used.
 

OVERVIEW

Since tack is designed to test terminfo's it is not possibleto rely on the correctness of the terminfo data base. Because of thisthe menuing system used with tack is vary primitive. When amenu is printed it will scroll the entire screen. To compensatefor this verbose menu system tack permits menu selectiontype ahead.If you already know what action you would like tack to performthen you can enter that value immediately and avoid the menu display.When in doubt the question mark (?) is a good character to type.A carriage return will execute the default action. These defaultactions are designed to run all the standard tests.

When tack first comes up it will display some basic informationabout the terminal. Take some time to verify this information.If it is wrong many of the subsequent tests will fail. The mostimportant item is the screen size. If the screen size is wrong thereis no point in proceeding. (home) and (clear) are also criticalto the success of subsequent tests. The values of (cr) (ind)(cub1) and (ht) may effect the tests if they are defined incorrectly.If they are undefined tack will set them to reasonable defaults.The last two entries on the display are the enquire and acknowledge strings.These strings are taken from the user strings (u9) and (u8).

By now you must be wondering why the terminfo names are enclosedin parenthesis. This has no profound meaning other than it makesthem stand out. The tack program uses this convention any timeit displays a terminfo name. Remember tack is designed torely on as little of the terminfo entry as possible. 

CREATING NEW ENTRIES

Tack has a number of tools that are designed to help gatherinformation about the terminal. Although these functions are notdependent on terminal type, you may wish to execute tackwith options -it. This will turn off initializationand default the standard entries.

These tools may be reached from the main menu by selectingthe 'tools' entry.

Echo tool: All data typed from the keyboard will be echoed backto the terminal. Control characters are not translated to the up arrow formatbut are sent as control characters. This allows you to test an escapesequence and see what it actually does. You may also elect toenable hex output on echo tool this will echo the characters inhexadecimal. Once the test is running you may enter the 'lines'or 'columns' keywords which will display a pattern that will helpyou determine your screen size. A complete list of keywords willbe displayed when the test starts. Type 'help' to redisplaythe list of available commands.

Reply tool: This tool acts much like the echo tool, butcontrol characters that are sent from the terminal more than one characterafter a carriage return will be expanded to the up arrow format. For exampleon a standard ANSI terminal you may type:

                CR ESC [ c

and the response will be echoed as something like:

                ^[ [ ? 6 c

ANSI sgr display: This test assumes you have an ANSI terminal. Itgoes through attribute numbers 0 to 79, displaying each in turn and using thatSGR number to write the text. This shows you which of the SGRmodes are actually implemented by the terminal. Note: some terminals (such asTektronix color) use the private use characters to augment the functionality ofthe SGR command. These private use characters may be interjected into theescape sequence by typing the character ( <, =, >, ? ) after the originaldisplay has been shown.

ANSI status reports: This test queries the terminal in standardANSI/VT-100 fashion. The results of this test may helpdetermine what options are supported by your terminal.

ANSI character sets: This test displays the character setsavailable on a ANSI/VT-100 style terminal.Character sets on a real VT-100 terminal are usually definedwith smacs=\E(0 and rmacs=\E(B. The first character after theescape defines the font bank. The second character defines thecharacter set. This test allows you to view any of the possiblecombinations. Private use character sets are defined by the digits.Standard character sets are located in the alphabetic range. 

VERIFYING AN EXISTING ENTRY

You can verify the correctness of an entry with the `begin testing'function. This entry is the default action and will be chosenif you hit carriage return (or enter). This will bring up asecondary menu that allows you to select more specific tests.

The general philosophy of the program is, for each capability, to send anappropriate test pattern to the terminal then send a description ofwhat the user should expect. Occasionally (as when checking function-keycapabilities) the program will ask you to enter input for it to check.

If the test fails then you have the option of dynamically changingthe terminfo entry and re-running the test. This is done withthe 'edit terminfo' menu item. The edit submenu allows you to changethe offending terminfo entry and immediately retest the capability.The edit menu lets you do other things with the terminfo, such as;display the entire terminfo entry,display which caps have been tested and display which caps cannotbe tested. This menu also allows you to write the newly modifiedterminfo to disc. If you have made any modifications to theterminfo tack will ask you if you want to save the fileto disc before it exits. The filename will be the same as the terminal name.After the program exits you can run the tic(1M) compiler on thenew terminfo to install it in the terminfo data base.

 

CORRECTING PAD TIMINGS

 

Theory of Overruns and Padding

Some terminals require significant amounts of time (that is, more than onetransmitted-character interval) to do screen updates that change largeportions of the screen, such as screen clears, line insertions,line deletions, and scrolls (including scrolls triggered by line feedsor a write to the lowest, right-hand-most cell of the screen).

If the computer continues to send characters to the terminal while oneof these time-consuming operations is going on, the screen may be garbled.Since the length of a character transmission time varies inversely withtransmission speed in cps, entries which function at lower speeds maybreak at higher speeds.

Similar problems result if the host machine is simply sending characters at asustained rate faster than the terminal can buffer and process them. In eithercase, when the terminal cannot process them and can't tell the host to stopsoon enough, it will just drop them. The dropped characters could be text,escape sequences or the escape character itself, causing some reallystrange-looking displays. This kind of glitch is called an overrun.

In terminfo entries, you can attach a pad time to each string capabilitythat is a number of milliseconds to delay after sending it. This will givethe terminal time to catch up and avoid overruns.

If you are running a software terminal emulator, or you are on an X pseudo-tty,or your terminal is on an RS-232C line which correctly handles RTS/CTShardware flow control, then pads are not strictly necessary. However, somedisplay packages (such as ncurses(3X)) use the pad counts to calculatethe fastest way to implement certain functions.For example: scrolling the screen may be faster than deleting the top line.

One common way to avoid overruns is with XON/XOFF handshaking.But even this handshake may have problems at high baud rates.This is a result of the way XON/XOFF works. The terminal tellsthe host to stop with an XOFF. When the host gets this character, it stopssending. However, there is a small amount of time between the stop request andthe actual stop. During this window, the terminal must continue to acceptcharacters even though it has told the host to stop. If the terminal sendsthe stop request too late, then its internal buffer will overflow. If it sendsthe stop character too early, then the terminal is not getting the mostefficient use out of its internal buffers. In a real application at high baudrates, a terminal could get a dozen or more characters before the host getsaround to suspending transmission. Connecting the terminal over a networkwill make the problem much worse.

(RTS/CTS handshaking does not have this problem because the UARTs aresignal-connected and the "stop flow" is done at the lowest level, withoutsoftware intervention).

 

Timing your terminal

In order to get accurate timings from your terminal tack needs to know when the terminal has finished processing all thecharacters that were sent. This requires a different type of handshakingthan the XON/XOFF that is supported by most terminals. Tackneeds to send a request to the terminal and wait for its reply.Many terminals will respond with an ACK when they receive an ENQ.This is the preferred method since the sequence is short.ANSI/VT-100 style terminals can mimic this handshake with theescape sequence that requests 'primary device attributes'.


   ESC [ c

The terminal will respond with a sequence like:


   ESC [ ? 1 ; 0 c

Tack assumes that (u9) is the enquire sequence and that (u8) is theacknowledge string. A VT-100 style terminal could set u9=\E[cand u8=\E[?1;0c.Acknowledge strings fall into two categories. 1) Strings with a unique terminating character and,2) strings of fixed length.The acknowledge string for the VT-100 is of the first type sinceit always ends with the letter 'c'. Some Tektronics terminalshave fixed length acknowledge strings. Tack supports bothtypes of strings by scanning for the terminating character untilthe length of the expected acknowledge string has arrived.(u8) should be set to some typical acknowledge that will bereturned when (u9) is sent.

Tack will test this sequence before running any of the padtests or the function key tests. Tack will ask you the following:


    Hit lower case g to start testing...

After it sends this message it will send the enquire string.It will then read characters from the terminal until it sees theletter g.

 

Testing and Repairing Pad Timings

The pad timings in distributed terminfo entries are often incorrect. Onemajor motivation for this program is to make it relatively easy to tune thesetimings.

You can verify and edit the pad timings for a terminal withthe `test string capabilities'function (this is also part of the `normal test sequence' function).

The key to determining pad times is to find out the effective baud rate ofthe terminal. The effective baud rate determines the number of charactersper second that the terminal can accept without either handshaking orlosing data. This rate is frequently less than the nominal cps rate on theRS-232 line.

Tack uses the effective baud rate to judge the duration of the test andhow much a particular escape sequence will perturb the terminal.

Each pad test has two associated variables that can be tweaked to help verifythe correctness of the pad timings. One is the pad test length. The other isthe pad multiplier, which is used if the pad prefix includes `*'. In cursesuse, it is often the first parameter of the capability (if there is one).For a capability like (dch) or (il) this will be the number of characterpositions or lines affected, respectively.

Tack will run the pad tests and display the results to the terminal.On capabilities that have multipliers tack will not tell youif the pad needs the multiplier or not. You must make this decisionyourself by rerunning the test with a different multiplier.If the padding changes in proportion to the multiplier than themultiplier is required. If the multiplier has little or no effect onthe suggested padding then the multiplier is not needed.Some capabilities will take several runs to get a good feel forthe correct values. You may wish to make the test longerto get more accurate results. System load will also effect theresults (a heavily loaded system will not stress theterminal as much, possibly leading to pad timings that are too short).

 

NOTE

The tests done at the beginning of the program are assumed to be correct laterin the code. In particular, tack displays the number of lines andcolumns indicated in the terminfo entry as part of its initial output.If these values are wrong a large number of tests will fail or give incorrectresults. 

FILES

tack.log
If logging is enabled then all characters written to the terminalwill also be written to the log file. This gives you the abilityto see how the tests were performed. This feature is disabled by default.
term
If you make changes to the terminfo entry tack will savethe new terminfo to a file. The file will have the same nameas the terminal name.
 

SEE ALSO

terminfo(5), ncurses(3X), tic(1m), infocmp(1m).You should also have the documentation supplied by the terminalmanufacturer. 

BUGS

If the screen size is incorrect, many of the tests will fail. 

AUTHOR

Concept, design, and original implementation byDaniel Weaver <danwAATTznyx.com>. Portions of the code anddocumentation are by Eric S. Raymond <esrAATTsnark.thyrsus.com>.


 

Index

NAME
SYNOPSIS
DESCRIPTION
OPTIONS
OVERVIEW
CREATING NEW ENTRIES
VERIFYING AN EXISTING ENTRY
CORRECTING PAD TIMINGS
Theory of Overruns and Padding
Timing your terminal
Testing and Repairing Pad Timings
NOTE
FILES
SEE ALSO
BUGS
AUTHOR

This document was created byman2html,using the manual pages.