MAN page from OpenSuSE device-mapper-1.02.27-8.2.x86_64.rpm
Section: MAINTENANCE COMMANDS (8)
Updated: Apr 06 2006Index
dmsetup - low level logical volume management
SYNOPSISdmsetup help[-c|-C|--columns]dmsetup create device_name [-u uuid] [--notable | --table <table> | table_file]dmsetup remove[-f|--force] device_namedmsetup remove_all[-f|--force]dmsetup suspend[--nolockfs] [--noflush] device_namedmsetup resumedevice_namedmsetup loaddevice_name [--table <table> | table_file]dmsetup cleardevice_namedmsetup reloaddevice_name [--table <table> | table_file]dmsetup renamedevice_name new_namedmsetup messagedevice_name sector messagedmsetup ls[--target target_type] [--exec command] [--tree [-o options]]dmsetup info[device_name]dmsetup info -c|-C|--columns[--noheadings] [--separator separator] [-o fields] [-O|--sort sort_fields][device_name]dmsetup export[device_name]dmsetup deps[device_name]dmsetup status[--target target_type][device_name]dmsetup table[--target target_type][device_name]dmsetup waitdevice_name[event_nr]dmsetup mknodes[device_name]dmsetup targetsdmsetup versiondmsetup setgeometrydevice_name cyl head sect start
dmsetup manages logical devices that use the device-mapper driver. Devices are created by loading a table that specifies a target foreach sector (512 bytes) in the logical device.
The first argument to dmsetup is a command. The second argument is the logical device name or uuid.
Invoking the command as devmap_name is equivalent to
dmsetup info -c --noheadings -j major -m minor.
Display output in columns rather than as Field: Value lines.
- -j|--major major
- -m|--minor minor
Specify the major number.
Specify the minor number.
Suppress the headings line when using columnar output.
Tell the kernel not to supply the open reference count for the device.
When creating a device, don't load any table.
Specify which fields to display.
Set the table being loaded read-only.
- --readahead [+]<sectors>|auto|none
Specify read ahead size in units of sectors.The default value is "auto" which allows the kernel to choosea suitable value automatically. The + prefix lets youspecify a minimum value which will not be used if it issmaller than the value chosen by the kernel."None" is equivalent to specifying zero.
- --table <table>
Specify a one-line table directly on the command line.
Specify the uuid.
- -v|--verbose [-v|--verbose]
Produce additional output.
Display the library and kernel driver version.
- createdevice_name [-u uuid] [--notable | --table <table> | table_file]
Creates a device with the given name.If table_file or <table> is supplied, the table is loaded and made live.Otherwise a table is read from standard input unless --notable is used.The optional uuid can be used in place ofdevice_name in subsequent dmsetup commands. If successful a device will appear as/dev/device-mapper/<device-name>. See below for information on the table format.
Outputs information in key/value format to be imported by other programs.
Outputs a list of (major, minor) pairs for devices referenced by thelive table for the specified device.
Outputs a summary of the commands available, optionally includingthe list of report fields.
Outputs some brief information about the device in the form:
State: SUSPENDED|ACTIVE, READ-ONLY
Tables present: LIVE and/or INACTIVE
Open reference count
Last event sequence number (used by wait)
Major and minor device number
Number of targets in the live table
- info[--noheadings] [--separator separator] [-o fields] [-O|--sort sort_fields][device_name]
Output you can customise.Fields are comma-separated and chosen from the following list:name, major, minor, attr, open, segments, events, uuid.Attributes are: (L)ive, (I)nactive, (s)uspended, (r)ead-only, read-(w)rite.Precede the list with '+' to appendto the default selection of columns instead of replacing it.Precede any sort_field with - for a reverse sort on that column.
- ls[--target target_type][--exec command][--tree [-o options]]
List device names. Optionally only list devices that have at leastone target of the specified type. Optionally execute a command foreach device. The device name is appended to the supplied command.--tree displays dependencies between devices as a tree.It accepts a comma-separate list of options.Some specify the information displayed against each node:device/nodevice; active, open, rw, uuid.Others specify how the tree is displayed:ascii, utf, vt100; compact, inverted, notrunc.
- load|reloaddevice_name [--table <table> | table_file]
Loads <table> or table_file into the inactive table slot for device_name.If neither is supplied, reads a table from standard input.
- messagedevice_name sector message
Send message to target. If sector not needed use 0.
Ensure that the node in /dev/mapper for device_name is correct.If no device_name is supplied, ensure that all nodes in /dev/mapper correspond to mapped devices currently loaded by the device-mapper kerneldriver, adding, changing or removing nodes as necessary.
- remove[-f|--force] device_name
Removes a device. It will no longer be visible to dmsetup.Open devices cannot be removed except with older kernelsthat contain a version of device-mapper prior to 4.8.0.In this case the device will be deleted when its open_count drops to zero. From version 4.8.0 onwards, if a device can'tbe removed because an uninterruptible process is waiting forI/O to return from it, adding --force will replace the table with one that fails all I/O, which might allow the process to be killed.
Attempts to remove all device definitions i.e. reset the driver.Use with care! From version 4.8.0 onwards, if devices can'tbe removed because uninterruptible processess are waiting forI/O to return from them, adding --force will replace the table with one that fails all I/O, which might allow the process to be killed. This also runs mknodes afterwards.
- renamedevice_name new_name
Renames a device.
Un-suspends a device. If an inactive table has been loaded, it becomes live.Postponed I/O then gets re-queued for processing.
- setgeometrydevice_name cyl head sect start
Sets the device geometry to C/H/S.
- status[--target target_type][device_name]
Outputs status information for each of the device's targets.With --target, only information relating to the specified target typeis displayed.
- suspend[--nolockfs] [--noflush]device_name
Suspends a device. Any I/O that has already been mapped by the devicebut has not yet completed will be flushed. Any further I/O to thatdevice will be postponed for as long as the device is suspended.If there's a filesystem on the device which supports the operation, an attempt will be made to sync it first unless --nolockfs is specified.Some targets such as recent (October 2006) versions of multipath may supportthe --noflush option. This lets outstanding I/O that has not yet reached thedevice to remain unflushed.
- table[--target target_type][device_name]
Outputs the current table for the device in a format that can be fedback in using the create or load commands.With --target, only information relating to the specified target typeis displayed.
Displays the names and versions of the currently-loaded targets.
Outputs version information.
Sleeps until the event counter for device_name exceeds event_nr.Use -v to see the event number returned.To wait until the next event is triggered, use info to findthe last event number.
Each line of the table specifies a single target and is of the form:
logical_start_sector num_sectors target_type target_args
There are currently three simple target types available together with more complex optional ones that implement snapshots and mirrors.
- lineardestination_device start_sector
The traditional linear mapping.
- stripednum_stripes chunk_size [destination start_sector]+
Creates a striped area.
e.g. striped 2 32 /dev/hda1 0 /dev/hdb1 0will map the first chunk (16k) as follows:
LV chunk 1 -> hda1, chunk 1
LV chunk 2 -> hdb1, chunk 1
LV chunk 3 -> hda1, chunk 2
LV chunk 4 -> hdb1, chunk 2
Errors any I/O that goes to this area. Useful for testing orfor creating devices with holes in them.
# A table to join two disks together
0 1028160 linear /dev/hda 0
1028160 3903762 linear /dev/hdb 0
# A table to stripe across the two disks,
# and add the spare space from
# hdb to the back of the volume
0 2056320 striped 2 32 /dev/hda 0 /dev/hdb 0
2056320 2875602 linear /dev/hdb 1028160
- The device directory name.Defaults to "/dev" and must be an absolute path.
Original version: Joe Thornber (thornberAATTsistina.com)
Device-mapper resource page: http://sources.redhat.com/dm/
- TABLE FORMAT
- ENVIRONMENT VARIABLES
- SEE ALSO
This document was created byman2html,using the manual pages.