MAN page from Other ax25-utils-2.1.42a-3.i386.rpm
RXECHO
Section: Linux System Managers Manual (8)
Updated: 15 October 1996
Index NAME
rxecho - Route AX.25 packets between ports transparently.
SYNOPSIS
rxecho [-l] [-v] DESCRIPTION
Rxechocopies AX.25 frames between interfaces without altering their contents. Thepurpose of this utility is to allow other AX.25 aware programs/computers toshare the same AX.25 ports as the Linux kernel AX.25 code. It could be usedto route packets out onto another serial port to allow another machinerunning DOS based programs to share the same radio ports as the Linuxmachine, or it could route packets out onto a pseudo-tty to anotherapplication on the same machine. The copying could even be to anotherradio port.
The copying of the packets is controlled by a configuration filerxecho.conf(5), which can be set up to selectively copy packets.
OPTIONS
- -l
- Enables logging of errors to the system log, the default is off.
- -v
- Display the version.
FILES
/etc/ax25/axports
/etc/ax25/rxecho.conf
SEE ALSO
axports(5),
rxecho.conf(5),
kissattach(8).
AUTHOR
Tomi Manninen OH2BNS <tpmanninAATTcc.hut.fi>
Index
- NAME
- SYNOPSIS
- DESCRIPTION
- OPTIONS
- FILES
- SEE ALSO
- AUTHOR
This document was created byman2html,using the manual pages.
