MAN page from RedHat Other pcmcia-cs-3.0.0-1.i386.rpm
XIRC2PS_CS
Section: Devices and Network Interfaces (4)
Updated: 1.2 1997/06/26 14:46:09
Index NAME
xirc2ps_cs - Xircom CE2 and CEM device driver
SYNOPSIS
insmod xirc2ps_cs.o[
card_type=n][
pc_debug=n][
irq_list=i,j,...]
DESCRIPTION
xirc2ps_csis the low-level Card Services driver for the XircomPCMCIA ethernet adapters. When this driver is attached to a card, itallocates the next available ethernet device.
PARAMETERS
- card_type=n
- Overrides the card type:
1 for a CE2
2 for a CEM28
3 for a CE3 (not yet supported)
4 for a CEM33. - pc_debug=n
- Selects the PCMCIA debugging level. This parameter is only availableif the module is compiled with debugging enabled. A non-zero valueenables debugging.
- irq_list=i,j,...
- Specifies the set of interrupts that may be allocated by this driver.x.SH "SEE ALSO"cardmgr(8), pcmcia(5).
BUGS
Please report to <xircom-bugsAATTisil.d.shuttle.de>
AUTHOR
Werner Koch<werner.kochAATTguug.de>
NAME
xirc2ps_cs - Xircom CE2 and CEM device driver
SYNOPSIS
insmod xirc2ps_cs.o[
card_type=n][
pc_debug=n][
irq_list=i,j,...]
DESCRIPTION
xirc2ps_csis the low-level Card Services driver for the XircomPCMCIA ethernet adapters. When this driver is attached to a card, itallocates the next available ethernet device.
PARAMETERS
- card_type=n
- Overrides the card type:
1 for a CE2
2 for a CEM28
3x for a CE3 (not yet supported)
4 for a CEM33. - pc_debug=n
- Selects the PCMCIA debugging level. This parameter is only availableif the module is compiled with debugging enabled. A non-zero valueenables debugging.
- irq_list=i,j,...
- Specifies the set of interrupts that may be allocated by this driver.
SEE ALSO
cardmgr(8),
pcmcia(5).
BUGS
Please report to <xircom-bugsAATTisil.d.shuttle.de>
AUTHOR
Werner Koch<werner.kochAATTguug.de>
Index
- NAME
- SYNOPSIS
- DESCRIPTION
- PARAMETERS
- BUGS
- AUTHOR
- NAME
- SYNOPSIS
- DESCRIPTION
- PARAMETERS
- SEE ALSO
- BUGS
- AUTHOR
This document was created byman2html,using the manual pages.
