MAN page from RedHat Other ax25-utils-2.1.22-1.i386.rpm

AXSPAWN.CONF

Section: Linux Programmer's Manual (5)
Updated: 4 February 1997
Index

NAME

ax25ipd.conf - Control the operation of ax25ipd.

DESCRIPTION

Theax25ipd.conffile controls the operation of the ax25ipd(8) program. The operation of theconfig file can best be seen in an example:

: # this is /etc/ax25/ax25ipd.conf
#
# ax25ipd config for station floyd.vk5xxx.ampr.org
#
# Select axip transport. 'ip' is what you want for
# compatibility with most other gates ...
#
socket ip
#
# Set ax25ipd mode of operation. (digi or tnc)
#
mode tnc
#
# If you selected digi, you must define a callsign.
# If you selected tnc mode, the callsign is
# currently optional, but this may change ...
# (2 calls can be allocated for dual port kiss ...)
#
#mycall vk5xxx-4
#mycall2 vk5xxx-5
#
# In digi mode, you may use an alias.
# (2 for dual port)
#
#myalias svwdns
#myalias2 svwdn2
#
# Send an ident every 540 seconds ...
#
beacon after 540
btext ax25ip-tncmode rob/vk5xxx- AXIP gateway
#
# Serial port, or pipe connected to a kissattach in
# my case
#
device /dev/ttyqd
#
# Set the device speed
#
speed 9600
#
# loglevel 0 - no output
# loglevel 1 - config info only
# loglevel 2 - major events and errors
# loglevel 3 - major events, errors, frame trace
# loglevel 4 - all events
# log 0 for the moment, syslog not implemented
#
loglevel 0
#
# If we are in digi mode, we might have a real
# tnc here, so use param to set tnc param's ...
#
#param 1 20
#
# ax.25 route definition, define as many as you
# need (< 128?)
# format is route (call/wildcard) (remote ip host)
# ssid=0 to route all ssid's
#
route vk5zeu-0 44.136.202.3
route vk5asf-15 44.136.188.221
route vk5asf-14 44.136.188.221
#
# a default route. Carefull here, all undefined
# traffic end's up here.
#
route default 44.136.202.241
#

More to come ...

FILES

/etc/ax25/ax25ipd.conf

This document was created byman2html,using the manual pages.

AXSPAWN.CONF

NAME

DESCRIPTION

FILES

SEE ALSO

Index