MAN page from OpenSuSE rear-2.4-70.git.0.0a85dae.unknown.x86_64.rpm
Section: \ \& (8)
Updated: 20 June 2018Index
rear - bare metal disaster recovery and system migration tool
rear [-h|--help] [-V|--version] [-dsSv] [-D|--debugscripts SET] [-c DIR] [-C CONFIG] [-r KERNEL] [--] COMMAND [ARGS...]
Relax-and-Recover is the leading Open Source disaster recovery solution. It is a modular framework with many ready-to-go workflows for common situations.
Relax-and-Recover produces a bootable image. This image can repartition the system. Once that is done it initiates a restore from backup. Restores to different hardware are possible. Relax-and-Recover can therefore be used as a migration tool as well.
Currently Relax-and-Recover supports various boot media (incl. ISO, PXE, OBDR tape, USB or eSATA storage), a variety of network protocols (incl. sftp, ftp, http, nfs, cifs) for storage and backup as well as a multitude of backup strategies (incl. IBM Tivoli Storage Manager, HP DataProtector, Symantec NetBackup, EMC NetWorker, EMC Avamar, FDR/Upstream, NovaBACKUP DC, Bareos, Bacula, rsync, rbme, Borg). This results in a bootable image that is capable of booting via PXE, DVD/CD, bootable tape or virtual provisioning.
Relax-and-Recover was designed to be easy to set up, requires no maintenance and is there to assist when disaster strikes. Its setup-and-forget nature removes any excuses for not having a disaster recovery solution implemented.
Recovering from disaster is made very straight-forward by a 2-step recovery process so that it can be executed by operational teams when required. When used interactively (e.g. when used for migrating systems), menus help make decisions to restore to a new (hardware) environment.
Extending Relax-and-Recover is made possible by its modular framework. Consistent logging and optionally extended output help understand the concepts behind Relax-and-Recover and help debug during development.
Relax-and-Recover comes with ABSOLUTELY NO WARRANTY; for details see the GNU General Public License at: m[blue]http://www.gnu.org/licenses/gpl.htmlm
- usage information
- alternative config directory; instead of /etc/rear
- additional config file; absolute path or relative to config directory
- debug mode(log debug messages to log file - also sets -v)
- debugscript mode(log executed commands viaset -x- also sets -v and -d)
- same as -d -v -D butdebugscript modewithset -SET
- kernel version to use (by default use running kernel)
- simulation mode(show what scripts are run without executing them)
- step-by-step mode(acknowledge each script individually)
- verbose mode(show more output and run many commands in verbose mode)
- version information
- check if the disk layout has changed since the last run of mkbackup/mkrescue
- dump configuration and system information; please run this to verify your setup
- format and label USB or tape media to be used with rear;
first argument is the USB or tape device to use, eg./dev/sdXor/dev/stX
- print full list of commands and options
- create rescue media and backup the system (only for internal backup methods)
- backup the system (only for internal backup methods) without creating rescue media
- create rescue media only
- recover the system; can be used only when running from the rescue media
- only restore the backup; can be used only when running from the rescue media
- create a pre-boot authentication (PBA) image to boot from TCG Opal 2-compliant self-encrypting disks
- administrate TCG Opal 2-compliant self-encrypting disks
- submit validation information
Use rear -v help for more advanced commands.
The process of bare metal disaster recovery consists of two parts:
- *Recreate the system layout
- *Restore the data to the system
Most backup software solutions are very good at restoring data but do not support recreating the system layout. Relax-and-Recover is very good at recreating the system layout but works best when used together with supported backup software.
In this combination Relax-and-Recover recreates the system layout and calls the backup software to restore the actual data. Thus there is no unnecessary duplicate data storage and the Relax-and-Recover rescue media can be very small.
For demonstration and special use purposes Relax-and-Recover also includes an internal backup method, NETFS, which can be used to create a simple tar.gz archive of the system. For all permanent setups we recommend using something more professional for backup, either a traditional backup software (open source or commercial) or rsync with hardlink based solutions, e.g. RSYNC BACKUP MADE EASY.
RESCUE IMAGE CONFIGURATION
The OUTPUT variable defines from where our bootable rescue image will be booted and the OUTPUT_URL variable defines where the rescue image should be send to. Possible OUTPUT settings are:
- Create only the Relax-and-Recover initramfs.
- (Default)Create a bootable ISO9660 image on disk asrear-$(hostname).iso
- Create on a remote PXE/NFS server the required files (such as configuration file, kernel and initrd image
- Create a bootable OBDR tape (optionally including the backup archive). Specify the OBDR tape device by usingTAPE_DEVICE.
- Create a bootable USB disk (using extlinux). Specify the USB storage device by usingUSB_DEVICE.
- Create a bootable image file named "rear-$(hostname).raw.gz", which
- *supports UEFI boot if syslinux/EFI or Grub 2/EFI is installed,
- *supports Legacy BIOS boot if syslinux is installed,
- *supports UEFI/Legacy BIOS dual boot if syslinuxandone of the supported EFI bootloaders are installed.
When using OUTPUT=ISO, RAMDISK, OBDR, USB, or RAWDISK you should provide the backup target location through the OUTPUT_URL variable. Possible OUTPUT_URL settings are:
- Write the image to disk. The default is in/var/lib/rear/output/.
- Write the image by mounting the target filesystem via NFS.
- Write the image by mounting the target filesystem via CIFS.
- Write the image usinglftpand the FISH protocol.
- Write the image usinglftpand the FTP protocol.
- Write the image usinglftpand the FTPS protocol.
- Write the image usinglftpand the HFTP protocol.
- Write the image usinglftpand the HTTP (PUT) procotol.
- Write the image usinglftpand the HTTPS (PUT) protocol.
- Write the image usinglftpand the secure FTP (SFTP) protocol.
- Write the image usingrsyncand the RSYNC protocol.
- Write the image using sshfs and the SSH protocol.
- Do not copy the rescue image from/var/lib/rear/output/to a remote output location.OUTPUT_URL=nullis useful when another program (e.g. anexternalbackup program) is used to save the rescue image from the local system to a remote place, or withBACKUP_URL=iso:///backupwhen the backup is included in the rescue image to avoid a (big) copy of the rescue image at a remote output location. In the latter case the rescue image must be manually saved from the local system to a remote place.OUTPUT_URL=nullis only supported together withBACKUP=NETFS.
If you do not specify OUTPUT_URL variable then by default it will be aligned to what was defined by variable BACKUP_URL. And, the rescue image will then be copied to the same location as your backup of the system disk(s).
The ISO_DEFAULT variable defines what default boot option is used on the rescue image. Possible values are manual, boothd or automatic. Manual will make you boot into the shell directly by default, boothd will boot to the first disk (default) or automatic will automatically start in recovery mode.
RESCUE IMAGE KERNEL COMMAND LINE OPTIONS
When booting the rescue image you can edit the kernel command line. There are some Relax-and-Recover specific kernel command line options:
- The rescue system start up scripts in /etc/scripts/system-setup.d/ are run one by one each one after pressingEnterand the scripts are run withset -xwhich prints commands and their arguments as they are executed.
auto_recover or automatic
- Launchrear recoverautomatically (without automated reboot). Together withdebugit runsrear recoverin debug mode.
- Launchrear recoverautomatically as withauto_recoverplus automated reboot after successfulrear recover.
ip= nm= netdev= gw=
- If IP address plus optionally netmask (default 255.255.255.0), network device (default eth0), and a default gateway are specified only that single network device is set up. Example:
ip=192.168.100.2 nm=255.255.255.0 netdev=eth0 gw=192.168.100.1
- Skip network devices setup by the rescue system start up scripts (overrides ip= nm= netdev= gw=).
BACKUP SOFTWARE INTEGRATION
Currently Relax-and-Recover supports the following backup methods. Please distinguish carefully between Relax-and-Recover support for 3rd party backup software and Relax-and-Recover internal backup methods. The latter also creates a backup of your data while the former will only integrate Relax-and-Recover with the backup software to restore the data with the help of the backup software without actually creating backups. This means that for all non-internal backup software you must take care of creating backups yourself (unless otherwise noted).
Especially the rear mkbackup command can be confusing as it is only useful for the internal backup methods and has usually no function at all with the other (external) backup methods.
The following backup methods need to be set in Relax-and-Recover with the BACKUP option. As mentioned we have two types of BACKUP methods - internal and external.
The following BACKUP methods are external of Relax-and-Recover meaning that usually you are responsible of backups being made:
- (default)Not really a backup method at all, Relax-and-Recover simply halts the recovery and requests that somebody will restore the data to the appropriate location (e.g. via SSH). This method works especially well with an rsync based backup that is pushed back to the backup client.
- Internal backup method that uses an arbitrary external command to create a backup and restore the data.
- Use HP Data Protector to restore the data.
- Use FDR/Upstream to restore the data.
- Use CommVault Galaxy 5 to restore the data.
- Use CommVault Galaxy 7 to restore the data.
- Use CommVault Galaxy 10 (or Simpana 10) to restore the data.
- Use Symantec NetBackup to restore the data.
- Use IBM Tivoli Storage Manager to restore the data. The Relax-and-Recover result files (e.g. ISO image) are also saved into TSM. There is a (currently experimental) first draft implementation that a TSM backup is created by callingdsmc incrementalduringrear mkbackup.
- Using EMC NetWorker (Legato) to restore the data.
- Using EMC Avamar to restore the data.
- Using SEP Sesam to restore the data.
- Using Novastor NovaBACKUP DC to restore the data.
- Use Rsync Backup Made Easy (rbme) to restore the data.
- Use Open Source backup solution BAREOS (a fork a BACULA) to restore the data.
- Use Open Source backup solution BACULA to restore the data.
- Use encrypted bandwidth-efficient backup solution using the rsync algorithm to restore the data.
- Use BorgBackup (short Borg) a deduplicating backup program to restore the data. Executingrear mkbackupwill create a Borg backup, see the sectionReaR with Borg back endin the ReaR user-guideScenariosdocumentation.
The following BACKUP methods are internal of Relax-and-Recover:
- Internal backup method which can be used to create a simple backup (tar archive).
- Use rsync to restore data.
If your favourite backup software is missing from this list, please submit a patch or ask us to implement it for you.
When using BACKUP=NETFS you must provide the backup target location through the BACKUP_URL variable. Possible BACKUP_URL settings are:
- To backup to local disk, useBACKUP_URL=file:///directory/path/
- To backup to NFS disk, useBACKUP_URL=nfs://nfs-server-name/share/path
- To backup to tape device, useBACKUP_URL=tape:///dev/nst0or alternatively, simply defineTAPE_DEVICE=/dev/nst0
- When backup methodBACKUP=RSYNCis chosen then we need to define a correspondingBACKUP_URLrule:
- To backup to a Samba share (CIFS), useBACKUP_URL=cifs://cifs-server-name/share/path. To provide credentials for CIFS mounting use a/etc/rear/cifscredentials file and defineBACKUP_OPTIONS="cred=/etc/rear/cifs"and pass along:
- To backup to USB storage device, useBACKUP_URL=usb:///dev/disk/by-path/REAR-000or use a real device node or a specific filesystem label. Alternatively, you can specify the device usingUSB_DEVICE=/dev/disk/by-path/REAR-000.
If you combine this withOUTPUT=USByou will end up with a bootable USB device.
- To backup to a remote server via sshfs (SSH protocol), useBACKUP_URL=sshfs://firstname.lastname@example.org/home/user/backup-dir/
It is advisable to addServerAliveInterval 15in the/root/.ssh/configfile for the remote system (remote-system.name.org).
- To include the backup within the ISO image. It is important that theBACKUP_URLandOUTPUT_URLvariables are different. E.g.
When using BACKUP=NETFS and BACKUP_PROG=tar there is an option to select BACKUP_TYPE=incremental or BACKUP_TYPE=differential to let rear make incremental or differential backups until the next full backup day e.g. via FULLBACKUPDAY="Mon" is reached or when the last full backup is too old after FULLBACKUP_OUTDATED_DAYS has passed. Incremental or differential backup is currently only known to work with BACKUP_URL=nfs. Other BACKUP_URL schemes may work but at least BACKUP_URL=usb requires USB_SUFFIX to be set to work with incremental or differential backup.
SUPPORT FOR SELF-ENCRYPTING DISKS
Relax-and-Recover supports self-encrypting disks (SEDs) compliant with the TCG Opal 2 specification if the sedutil-cli executable is installed.
Self-encrypting disk support includes
- *recovery (saving and restoring the systemcqs SED configuration),
- *setting up SEDs, including assigning a disk password,
- *providing a pre-boot authentication (PBA) system to unlock SEDs at boot time.
To prepare booting from an SED, run rear mkopalpba, then create the rescue system.
To set up an SED, boot the Relax-and-Recover rescue system and run `rear opaladmin setupERASE DEVICE` (DEVICE being the disk device path like /dev/sda).
For complete information, consult the section "Support for TCG Opal 2-compliant Self-Encrypting Disks" in the Relax-and-Recover user guide.
To configure Relax-and-Recover you have to edit the configuration files in /etc/rear/. All *.conf files there are part of the configuration, but only site.conf and local.conf are intended for the user configuration. All other configuration files hold defaults for various distributions and should not be changed.
In /etc/rear/templates/ there are also some template files which are used by Relax-and-Recover to create configuration files (mostly for the boot environment). Modify the templates to adjust the information contained in the emails produced by Relax-and-Recover. You can use these templates to prepend your own configurations to the configuration files created by Relax-and-Recover, for example you can edit PXE_pxelinux.cfg to add some general pxelinux configuration you use.
In almost all circumstances you have to configure two main settings and their parameters: The backup method and the output method.
The backup method defines, how your data was saved and whether Relax-and-Recover should backup your data as part of the mkrescue process or whether you use an external application, e.g. backup software to archive your data.
The output method defines how the rescue system is written to disk and how you plan to boot the failed computer from the rescue system.
See the default configuration file /usr/share/rear/conf/default.conf for an overview of the possible methods and their options.
An example to use TSM for backup and ISO for output would be to add these lines to /etc/rear/local.conf (no need to define a BACKUP_URL when using an external backup solution):
And if all your systems use NTP for time synchronisation, you can also add these lines to /etc/rear/site.conf
Do not forget to distribute the site.conf to all your systems.
The resulting ISO image will be created in /var/lib/rear/output/. You can now modify the behaviour by copying the appropriate configuration variables from default.conf to local.conf and changing them to suit your environment.
- Successful program execution.
- Usage, syntax or execution errors. Check the log file in/var/log/rear/for more information.
To print out the current settings for BACKUP and OUTPUT methods and some system information. This command can be used to see the supported features for the given release and platform.
# rear dump
To create a new rescue environment. Do not forget to copy the resulting rescue system away so that you can use it in the case of a system failure.
# rear -v mkrescue
To create a new rescue image together with a complete archive of your local system run the command:
# rear -v mkbackup
- The program itself.
- System specific configuration can be set here.
- Site specific configuration can be set here (not created by default).
- Directory holding the log files.
- Relax-and-Recover working directory. If Relax-and-Recover exits with an error, you must remove this directory manually.
- Relax-and-Recover script components.
- Relax-and-Recover default values. Contains a complete set of parameters and its explanation. Please do not edit or modify. Copy values tolocal.conforsite.confinstead.
Feedback is welcome, please report any issues or improvements to our issue-tracker at: m[blue]http://github.com/rear/issues/m
Furthermore, we welcome pull requests via GitHub.
Relax-and-Recover comes with extensive documentation located in /usr/share/doc.
The ReaR project was initiated in 2006 by Schlomo Schapiro (m[blue]https://github.com/schlomom) and Gratien Dcqhaese (m[blue]https://github.com/gdham) and has since then seen a lot of contributions by many authors. As ReaR deals with bare metal disaster recovery, there is a large amount of code that was contributed by owners and users of specialized hardware and software. Without their combined efforts and contributions ReaR would not be the universal Linux bare metal disaster recovery solution that it is today.
As time passed the project was lucky to get the support of additional developers to also help as maintainers: Dag Wieers (m[blue]https://github.com/dagwieersm), Jeroen Hoekx (m[blue]https://github.com/jhoekxm), Johannes Meixner (m[blue]https://github.com/jsmeixm), Vladimir Gozora (m[blue]https://github.com/gozoram) and S'ebastien Chabrolles (m[blue]https://github.com/schabrollesm). We hope that ReaR continues to prove useful and to attract more developers who agree to be maintainers. Please refer to the MAINTAINERS (m[blue]https://github.com/rear/rear/blob/master/MAINTAINERSm) file for the list of active and past maintainers.
To see the full list of authors and their contributions please look at the git history (m[blue]https://github.com/rear/rear/graphs/contributorsm). We are very thankful to all authors and encourage anybody interested to take a look at our source code and to contribute what you find important.
Relax-and-Recover is a collaborative process using Github at m[blue]http://github.com/rear/m
The Relax-and-Recover website is located at: m[blue]http://relax-and-recover.org/m
The copyright is held by the original authors of the respective code pieces as can be seen in the git history at m[blue]https://github.com/rear/rear/graphs/contributorsm
Relax-and-Recover comes with ABSOLUTELY NO WARRANTY; for details see the GNU General Public License at m[blue]http://www.gnu.org/licenses/gpl.htmlm
- GLOBAL OPTIONS
- BACKGROUND INFORMATION
- RESCUE IMAGE CONFIGURATION
- RESCUE IMAGE KERNEL COMMAND LINE OPTIONS
- BACKUP SOFTWARE INTEGRATION
- SUPPORT FOR SELF-ENCRYPTING DISKS
- EXIT STATUS
- SEE ALSO
This document was created byman2html,using the manual pages.