| Name : cdk-avr-cisp
| |
| Version : 1.0.3
| Vendor : Li-Pro_Net
|
| Release : 20030906
| Date : 2003-09-06 23:11:06
|
| Group : Development/CDK4AVR/programmer
| Source RPM : cdk-avr-cisp-1.0.3-20030906.src.rpm
|
| Size : 0.14 MB
| |
| Packager : Stephan Linz < linz_li-pro_net>
| |
| Summary : CDK4AVR -- Compact In-System Programmer
|
Description :
CDK4AVR stands for Cross Development Kit for Atmels AVR RISC processor serie
and should you support with a comprehensive Assembler and C development
environment for even this processor familie under Linux. It will present only
free of fee tools, so you can use it without risks. Further you will finde
some useful OS projects and related sample code all arround AVRs inside of
the example packages.
Til now there are the following packages available:
* see cdk-avr-base package
CISP is a special compact In-System Programmer for the C2N232
project by Marko Mäkelä. CISP transfers data to and from the
non-volatile program or data memory of an Atmel AVR RISC
processor over the Serial Peripheral Interface (SPI).
For more informartion see:
* http://www.funet.fi/pub/cbm/crossplatform/transfer/C2N232/
* ftp://ftp.funet.fi/pub/cbm/crossplatform/transfer/C2N232/
Nevertheless you could use this programmer software together with following
hardware components:
* c2n232 serial (RESET=DTR SCK=RTS MOSI=TXD MISO=CTS)
* dasa serial (RESET=RTS SCK=DTR MOSI=TXD MISO=CTS)
* ponyprog serial (RESET=TXD SCK=RTS MOSI=DTR MISO=CTS)
* dapa parallel (RESET=INIT SCK=STROBE MOSI=D0 MISO=BUSY)
* dt006 parallel (RESET=D2 SCK=D3 MOSI=D0 MISO=BUSY)
* stk200 Atmel STK200 Evaluation Board (parallel)
Install CISP if you need to perform any of these types of actions at
your AVR (eva)board. Only some programmers or users of C2N232 will
want to install CISP.
|
