Changelog for avrdude-6.3-1.1.x86_64.rpm :
Wed Jul 12 14:00:00 2017
- remove incorrect provides in library subpackage
- remove not needed obsoletes in library subpackage
- make libftdi1 build dependency only for openSUSE
- spec file cleaned by spec-cleaner

Mon Dec 12 13:00:00 2016
- drop parport from 50-avrdude.rules for udev (bsc#994883)
limit to USB

Fri Mar 18 13:00:00 2016
- Update to 6.3

* New devices supported:
- ATmega48PB, ATmega88PB, ATmega168PB
- ATtiny28 (HVPP-only device)
- AT90PWM216 (bug #42310: New part description for AT90PWM216)
- ATmega32M1 (patch #7694 Add support for the atmega32m1)

* New programmers supported:
- Atmel mEDBG: xplainedmini, xplainedmini_dw
- ftdi_syncbb
- uncompatino, ttl232r (FTDI TTL232R-5V with ICSP adapter)
(patch #8529 2 more ftdi_syncbb devices)
- Atmel DFU, using FLIP protocol version 1 (AT90USB and ATmegaU
devices), or version 2 (Xmega devices)
- Atmel-ICE (ARM/AVR), JTAG, PDI, debugWIRE, ISP modi

* Major changes compared to the previous version:
- The stk500v2 implementation now uses its own higher-level
command implementation for byte-wide access, rather than the
historic SPI_MULTI command where all the low-level ISP
implementation had to be assembled manually inside AVRDUDE. In
addition to the traditional STK500, this implementation is also
used by all the more modern Atmel tools (AVRISPmkII, JTAGICEmkII
in ISP mode, STK600 in ISP mode).
- The -B option can be suffixed with \"Hz\", \"kHz\", or \"MHz\", in
order to specify a bitclock frequency rather than period.
- Print part id after signature (patch #8440 )
- buspirate: Also support \"cpufreq\" extended parameter
in binary mode (patch #8504 )
- The \"-P net:\" syntax (forwarding of serial data over TCP) is now
also implemented for Win32 systems.
- Atmel EDBG protocol support added (JTAGICE3, XplainedPro, Atmel-ICE)
- disable IPv6 temporarily

Thu Apr 3 14:00:00 2014
- include released tarball from upstream
- disable source service
- refresh patch avrdude-5.11-no-builddate.diff

Mon Feb 10 13:00:00 2014
- Bump version number to 6.1 in _service to reflect upstream.
- Generate udev rules from avrdude-usbdevices, which has a simpler
and easier to maintain format. This also simplifies following
further upstream changes in udev rules syntax.
- IPv6-enable the \"-P net:host:port\" option (avrdude-ipv6.patch).

Sat Feb 8 13:00:00 2014
- no longer use an URL for the source, since the tarball is generated

Sat Feb 8 13:00:00 2014
- set the _service to localonly

Fri Jan 17 13:00:00 2014
- work around systemd-udev warnings, by moving comments in the
udev rules file to the beginning of a line.

Fri Feb 15 13:00:00 2013
- Build the info file only, no PS/PDF documentation.
- Don\'t require libftdi for older SUSE versions.

Thu Feb 7 13:00:00 2013
- Build from svn snapshot (last official release is too old).
- avrdude-use-serial-device-for-serbb.patch is no longer needed.
- Add UDB IDs for Arduino Leonardo and LUFA ACM bootloaders.
- Give access to programmer devices only to local users.
- Build documentation from source instead of importing pre-built
html and pdf documentation.
- Disable documentation building on releases older than 12.3 due
to texinfo problems.

Sat Dec 8 13:00:00 2012
- Did not build.
- 5.11 tar balls are now missing again. retrying with 5.11.1
- typo in spec file fixed.

Wed Nov 21 13:00:00 2012
- All this should have been part of my earlier submit sr#142228:

* obsoleted upstreamed patches: tn4313.diff, avrdude_butterfly_mk.patch

* pulled patch from o:F: avrdude-use-serial-device-for-serbb.patch

* dropped dubious patch: avrdude-5.5.usbtiny.64bit.patch

Wed Nov 21 13:00:00 2012
- retrying sr#110452, sr#141518, so that we can finally close bnc#736064
- merged a commit that was only made to o:F

Wed Mar 21 13:00:00 2012
- Reverted to version 5.11 -- the 5.11.1 tarball was missing.

Tue Oct 18 14:00:00 2011
- Version 5.11.1 from savannah
- Add libftdi1-devel to BuildRequires to support additional

Thu Sep 29 14:00:00 2011
- don\'t use download_files service - it breaks all the time
- remove builddate from binary to avoid unnecessary republising

Sat Sep 17 14:00:00 2011
- Remove redundant tags/sections from specfile
- Use %_smp_mflags for parallel build

Sun Aug 28 14:00:00 2011
- Version 5.11 from savannah

Mon Jun 20 14:00:00 2011
DTR/RTS twiddling didn\'t match the Arduino \'auto-reset\' hardware
for the programmer type \'arduino\'

Mon Mar 7 13:00:00 2011
- bnc#676024, support for attiny4313 added according to

Mon Mar 7 13:00:00 2011
- Resurrected the changelog.
misinterpretes timestamps 2010-01-01 within changelog entries as
new changelog entries.

Mon Sep 6 14:00:00 2010
- Use ATTRS instead of SYSFS in udev rules.
- Add old USBasp VID/PID to udev rules.
- Dropped most of the .changes file to make osc happy.

Sat May 15 14:00:00 2010
- fixed mkbutterfly target, to test the bootloader response in the loop,
instead of once afterwards.

Thu Feb 11 13:00:00 2010
- Remove unused source and patch files.
- Remove special cases for distributions we don\'t build for.
- Move from /opt/cross to /usr, as this is not a cross compile
tool for which there is a \"native\" counterpart.
- Use the pre-built pdf from upstream to avoid the latex dependency.
- Add proper info file handling.
- Add udev rules for USB programmers and USB serial adapters, so
that they can be accessed by all users. This is considered safe
as this is a very specialized package that will probably only get
installed on development machines with no untrusted local or
remote users.

Fri Jan 22 13:00:00 2010
- update to avrdude-5.10
bug #28660: Problem with loading intel hex rom files that exceed
0x10000 bytes

* fileio.c: Fix two byte shifts.

* Fix FreeBSD default serial port name.

* doc/avrdude.texi: (Dito.)

* jtagmkII.c: If entering JTAG mode fails with a bad JTAG ID
message, retry with external reset applied (in case the target
is in sleep mode or has asserted the JTD bit).

Fri Jan 22 13:00:00 2010
- added /usr/bin/avrdude symlink,
so that /opt/cross/bin is no longer needed in PATH

Tue Jan 5 13:00:00 2010
- added avrdude_butterfly_mk.patch uses a modified version of butterfly.
This patch creates an avrdude providing bot the unchanged butterfly and
a new mkbutterfly. env BUTTERFLY_MK=1 avrdude -c butterfly is also provided.
Sent upstream as

Mon Dec 28 13:00:00 2009
- Add \"texinfo-dvi\" to BuildRequires for Fedora/RHEL/CentOS
to fix finally the build because of a missing \"texi2dvi\".

Mon Dec 28 13:00:00 2009
- Give /etc/modprobe.d/avrdude_parport the \'conf\' extension to make
new versions of module-init-tools happy.
- Add \"texinfo\" to BuildRequires for Fedora/RHEL/CentOS.

Thu Dec 17 13:00:00 2009
- readded other half of half-upstreamed avrdude-5.5.usbtiny.64bit.patch
- convertUniToAscii bug, HVPP of EEPROM bug, serious memory corruption
ATmega163 fix, tcsetattr() on Solaris bug, Crash in stk500v2_open,
xmega problems with JTAGICEmkII, New devices: ATXMEGA64A1, ATXMEGA192A1,
- bnc#564303

Tue Dec 15 13:00:00 2009
- avrdude 5.8 first test